Router prompts wireless network password digit error how to do

the solution to the error of the number of password digits in the wireless network by the universal router

First, WPA/WPA2 encryption method

Using WPA/WPA2 encryption, this situation is most likely not supported by the system, please check whether the system supports this encryption, click on the wireless Network Properties-association, in network authentication to see if the system supports the encryption method set in the RF router.

If you do not have the encryption set in the RF router, download the operating system patches to support the encryption of the RF router or the encryption method in the general wireless router to the support of the wireless network card.

Two, WEP encryption method

Using WEP encryption, this occurs because the password length does not meet the requirements and the password is reconfirmed.

WEP encryption each key type requires the number of key characters:

64-bit key: 5 ASCII characters, 10 hexadecimal characters

128-bit key: 13 ASCII characters, 26 hexadecimal characters

152-bit key: 16 ASCII characters, 32 hexadecimal characters

Follow the steps above to resolve the problem that the network password must be 40-bit or 104-bit wrong.