Setup method of DTU configuration SMS receiving Center

Reference: Http://www.winertech.com/xzzx1.asp for that DTU configuring SMS Receive Center Setup method

The premise: For that DTU uses the dual serial port communication mode, debugging serial port and the communication serial port separation. Please connect the serial port to the DTU debug serial port.

1, open the Configuration Tool configtool,->1, in order to select the corresponding serial number, 2-6 according to the default settings, 7 open the serial port.

2, follow the prompts to power on the device, if already power on please re-power. Enter the configuration status.

3, select the central server parameter directory, in the directory, set the server address and port and SMS center receive number,

4, the last save parameter (1), the prompt box has a display saved successfully (2), restart the device (3) completed.

* Note: The DTU internal SIM card (mobile card) that supports the SMS receiving center needs to be enabled for SMS, but it is not possible to test successfully.

Test steps:

1, do not open the Server center address port

2, the DTU is not connected to the central state, the DTU status lights in the blue flashing state

3, the serial port to the DTU communication serial port, through the serial port tool to the communication serial port to send data, test the phone can receive data normally.

Setup method of DTU configuration SMS receiving Center