Switch link Aggregation

Switch link aggregation www.2cto.com

SWA Switch configuration content: www.2cto.com Switch> enSwitch> enable Switch # confSwitch # configure authentication ing from terminal, memory, or network [terminal]? Enter configuration commands, one per line. end with CNTL/Z. switch (config) # hSwitch (config) # hostname SWASWA (config) # in vlSWA (config) # in vlan 1SWA (config-if) # ip add 192.168.1.101 255.255.255.0SWA (config-if) # no shuSWA (config-if) # no shutdown % LINK-5-CHANGED: Interface Vlan1, changed state to up % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to upSWA (config-if) # exSWA (config) # spSWA (c Onfig) # spanning-tree mSWA (config) # spanning-tree mode rSWA (config) # spanning-tree mode rapid-pvst SWA (config) # in f0/1SWA (config-if) # channel-gSWA (config-if) # channel-group 1 mSWA (config-if) # channel-group 1 mode dSWA (config-if) # channel-group 1 mode desirable % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down % LINEPROTO-5-UPDOWN: line protocol on Interface FastEthernet0 /1, changed state to upSWA (config-if) # exSWA (config) # in f0/2SWA (config-if) # channel-gSWA (config-if) # channel-group 1 mSWA (config-if) # channel-group 1 mode dSWA (config-if) # channel-group 1 mode desirable % LINEPROTO-5-UPDOWN: line protocol on Interface FastEthernet0/2, changed state to down % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to upSWA (config-if) # exSWA (config) # SWB Server change configuration: www.2cto.com Switch> enSwitch> enable Switch # confSwitch # configure authentication ing from terminal, memory, or network [terminal]? Enter configuration commands, one per line. end with CNTL/Z. switch (config) # hSwitch (config) # hostname SWBSWB (config) # in vlSWB (config) # in vlan 1SWB (config-if) # ip add 192.168.1.102 255.255.255.0SWB (config-if) # no shuSWB (config-if) # no shutdown % LINK-5-CHANGED: Interface Vlan1, changed state to up % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to upSWB (config-if) # exSWB (config) # spSWB (config) # spanning-tree mSWB (config) # spanning-tree mode SWB (config) # spanning-tree mode rSWB (config) # spanning-tree mode rapid-pvst SWB (config) # in f0/1SWB (config-if) # channel-gSWB (config-if) # channel-group 1 mSWB (config-if) # channel-group 1 mode dSWB (config-if) # channel-group 1 mode desirable % LINEPROTO-5-UPDOWN: line protocol on Interface FastEthernet0/1, changed state to down % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to upSWB (config-if) # % LINK-5-CHANGED: interface Port-channel 1, changed state to up % LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel 1, changed state to upSWB (config-if) # exSWB (config) # in f0/2SWB (config-if) # channel-gSWB (config-if) # channel-group 1 mSWB (config-if) # channel-group 1 mode dSWB (config-if) # channel-group 1 mode desirable % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down % LINEPROTO-5-UPDOWN: line protocol on Interface FastEthernet0/2, changed state to upSWB (config-if) # exSWB (config )#