Three ways to turn on Win7 network connections

Use the computer to surf the internet, unavoidable often occurs the computer does not connect the network the breakdown. When this happens, you need to go to the computer's "network connection" to view the network's parameter status. What are the ways to open the operating system's network connections? The following is an example of a win 7 operating system that describes three ways to open a network connection:

Tools/raw Materials

Win 7 Operating system

CMD command line

Method One: Use the "ncpa.cpl" command to open a network connection

1 opens directly using the "Run" dialog box of Win 7.

2 Enter "Ncpa.cpl" in the Win 7 "start"-> "Run" dialog box, as shown in the red box below, then click "OK" button.

3 after the above operation will be able to enter the win 7 of the "Network connection."

4 Use the cmd command line to execute the "ncpa.cpl" command.

5 in the Win 7 "start"-> "Run" dialog box type "cmd" as shown in the red box, and then click the "OK" button.

6 after executing the "ncpa.cpl" command on the cmd command line that appears, you can also enter the operating system's network connection.

End

Method Two: Open network connection from Win 7 control Panel

1 Click the "Network and Internet" button in the control Panel, as shown in the red box below.

2 then click "View network Status and Tasks" as shown in the following figure.

3 Click on the left column "Change adapter Settings", you can enter to win 7 "network connection."

End

Method Three: Open network connection from the desktop of Win 7

Click on the network connection icon in the bottom right corner of the win 7 desktop, as shown in the image below, the icon in the bottom red box, and then click on the "Open Network and Sharing Center" in the red box above.

Click on the left section "Change adapter Settings" To enter the win 7 "network connection."

After performing the above operation, you can also enter the "network connection" to win 7.

End

Attention matters

The method is relatively quick and convenient, the method is more complicated and the three methods are more intuitive.

When users are involved in viewing and changing the IP address of a computer, they must first go to the operating system's "network connection" and then select the corresponding network card to view and change the IP address. So, it's best to remember one of those comrades who often surf the internet.