TP-Link TL-WR340G + wireless router settings tutorial (1)

Wireless RouterAlthough it is widely used and easy to use, there are still many friends who are new to wireless routers and do not know how to set up wireless routers. After all, it is not the same as non-Network-managed switches, plug in and use it. Vendors generally provide instructions, but some of them are not concise and complex. Although some provide installation guides, they are obviously unable to reflect the customization of wireless router settings. Today, we will express it in a simple and easy-to-understand way, hoping to help readers and friends.

1. After connecting the TP-LINK wireless router through the wired mode, enter 192.168.1.1 in IE, the user name and password is admin by default, then enter the above settings interface.

After the interface is opened, a small page of the Setting wizard is usually displayed. If you have some experience, you will check "The Wizard will not pop up automatically next time you log on" to directly perform other detailed settings. However, it is recommended that common users perform simple wizard settings based on the next step, which is convenient and simple.

Click Next to perform simple installation and wireless router settings.

2. Generally, the first PPPoE option is selected for ASDL dial-up Internet access for the next step.

However, if you are using a LAN or other special network connections such as video broadband or Internet access through other computers, you can select the following two "Ethernet bandwidth" for the next step. Here we will describe the ADSL dial-up Internet access settings. The following two items will be described later.

Go to the account and password input interface of the ADSL dial-up Internet access, enter the account and password provided by the user in the network service provider as prompted literally, and then directly follow the next step.

3. The following four parameters are displayed: Wireless status, SSID, frequency band, and mode.

If the wireless signal is not detected, check whether the wireless status of your wireless router is enabled. The SSID item can be modified and added based on your own interests. This item only requires identification names of connected devices after searching for connected devices during wireless connection.

In addition, when we pull down the frequency band, we can see that there are 13 digital options. The setting here is only the wireless signal frequency band you route, if you have multiple wireless routes nearby, you can set other frequencies here to avoid conflicts in some wireless connections.

Then the mode option is pulled down and we can see several basic wireless connection working modes of the TP-LINK wireless router, 11Mbps802. 11 B) the maximum operating rate is 11 Mbps; 54Mbps802. 11g) the maximum operating rate is 54 Mbps, and is also backward compatible with 11 Mbps. In the TP-LINK wireless router products, there are also some of the speed expansion series of unique Mbps working mode ).

4. Next, the advanced wireless router settings will briefly introduce the page and setting parameters for each setting option.

The first option is the running status. Just now we are on the TP-LINK wireless router settings are reflected in the above, if you are ADSL dial-up Internet users you here on the page by the connection can be directly connected to the network, if you are an Ethernet Broadband User, you can connect to the Internet through a dynamic IP or a fixed IP address. The corresponding information will also appear here.

5. Set the LAN port in the network parameters here, we just need to keep the default settings.

If you have a certain understanding of the network, you can also set the IP address and subnet mask according to your preferences. As long as you do not conflict with the IP address of other workstations, there is basically no big problem. Remember to press save after modification and restart the router.

Note: When the IP Parameters of the LAN port, including IP addresses and subnet masks, are changed, to ensure that the DHCPserver works properly, ensure that the address pool and static address set in DHCPserver are in the same network segment as the new LAN port IP address, and restart the wireless router.

6. here basically TP-LINK wireless router provides 7 kinds of external connection network, because now basically home users are using ADSL dial-up Internet, mainly to introduce you to the ADSL dial-up Internet Settings.

First, select PPPoE for the WAN port connection type. here we can see several familiar and basic settings options. As mentioned earlier, you can enter your internet account and password provided by your network service provider.

The following three options are available: Normal Mode, special dialing Mode 1, and special dialing Mode 2. The normal mode is standard dial-up, the special 1 is to crack the Xi'an star Express version, and the special 2 is to crack the Hubei star Express version. If it is not in your region, some routes are used in the normal mode. there is also a special 3: cracking the fast version of Jiangxi star ).

Then there are four corresponding connection modes:

1. Connect as needed and automatically connect when there is access.

2. Automatic connection. It is automatically connected after startup and disconnection. The network is automatically connected and disconnected when the computer is turned on and off.

3. timed connection: automatic connection within a specified period of time.

4. Manual connection. There is little difference from the first one. The only difference is that you need to press the following connection button to dial the internet.