VRRP configuration and floating static routes

VRRP configuration
In SW1 configuration
[Huawei]sysname SW1//Modify Name
[Sw1]vlan 10//Create VLAN 10
[Sw1-vlan10]quit//Exit command
[Sw1]port-group group-member G0/0/1 G0/0/2 G0/0/3//Create Group in group enter interface G0/0/1 G0/0/2 G0/0/3
[Sw1-port-group]port Link-type Access//Add this group to access
[Sw1-port-group]port Default VLAN 10//Put this group into VLAN 10

AR1
[Huawei]sysname AR1//Modified name
[Ar1]interface gigabitethernet0/0/0//Enter g0/0/0 interface
[AR1-GIGABITETHERNET0/0/0]IP address 192.168.10.254 24//Configure Gateway IP address
[AR1-GIGABITETHERNET0/0/0]VRRP Vrid 1 Virtual-ip 192.168.10.250//Configure virtual Gateway IP address

AR2
[Huawei]sysname AR2//Modify Name
[Ar2]interface gigabitethernet0/0/0//Enter g0/0/0 interface
[AR2-GIGABITETHERNET0/0/0]IP Address 192.168.10.253 24//Configure Gateway IP address
[AR2-GIGABITETHERNET0/0/0]VRRP Vrid 1 Virtual-ip 192.168.10.250//Configure virtual Gateway IP address

[AR2-GIGABITETHERNET0/0/0]VRRP Vrid 1 priority 200//modified to 200

Floating static routes: Configuring
AR1:
[Huawei]sysname AR1//Modify Name
[Ar1]interface gigabitethernet0/0/0//Enter g0/0/0 interface
[AR1-GIGABITETHERNET0/0/0]IP address 192.168.10.254 24//Configure Gateway IP address
[AR1-GIGABITETHERNET0/0/0]VRRP Vrid 1 Virtual-ip 192.168.10.250//Configure virtual Gateway IP address
[Ar1]interface gigabitethernet 0/0/1//Enter G0/0/1//Enter interface
[AR1-GIGABITETHERNET0/0/1]IP Address 192.168.13.1 24//Configure IP Address
[Ar1]ip route-static 192.168.30.0 24 192.168.13.3//Fright

AR2:
[Huawei]sysname AR2//Modify name
[ar2]interface gigabitethernet0/0/0//Enter g0/0/0 interface
[AR2-GIGABITETHERNET0/0/0]IP address 192.168.10.253 24//Configure gateway IP address
[AR2-GIGABITETHERNET0/0/0]VRRP vrid 1 Virtual-ip 192.168.10.250//Configure virtual gateway IP address
[ AR2-GIGABITETHERNET0/0/0]VRRP Vrid 1 priority 200//modify precedence is
[ar2]interface gigabitethernet 0/0/1//Enter Interface
[ AR2-GIGABITETHERNET0/0/1]IP address 192.168.23.2 24//Configure IP addresses
[ar2]ip route-static 0.0.0.0 0.0.0.0 192.168.23.3// Scare a hop. Static route

Isp:
<isp>system-view//Enter system mode
[Isp]sysname ISP//Modify Name
[Isp]interface gigabitethernet 0/0/0//Enter interface g0/0/0
[ISP-GIGABITETHERNET0/0/0]IP Address 192.168.13.3 24//Configure IP Address
[Isp]interface gigabitethernet 0/0/1//Enter interface G0/0/1
[ISP-GIGABITETHERNET0/0/1]IP Address 192.168.23.3 24//Configure IP Address
[Isp]interface gigabitethernet 0/0/2//Enter interface G0/0/2
[ISP-GIGABITETHERNET0/0/2]IP Address 192.168.30.254 24//Configure Gateway IP address
[Isp]ip route-static 192.168.10.0 24 192.168.23.2//scare Jump, default priority is 60
[Isp]ip route-static 192.168.10.0 192.168.13.1 Preference 65//scare Jump, change priority to 65

VRRP configuration and floating static routes