WAN port configuration of Alpha Router

Set the WAN port configuration information. Select the corresponding WAN port for configuration, and then enter the corresponding parameters. log on to the vro and click WAN port settings in the left-side navigation pane. 1. WAN port selection www.2cto.com on the wa n port selection, divided into WAN1-WAN4 port, were defined. You can select static IP, ADSL dial-up connection, DHCP connection, and DHCP + connection as needed to close the connection.

2. When static IP is configured, the ISP provides the corresponding IP address, and the DNS must be filled in manually.

3. The connection configuration option is an ADSL dial-up connection. the user's Internet account and password during connection are provided by the local ISP provider. (1) User name: Enter the user name provided by the local ISP provider; (2) log on with the password: enter the password provided by the local ISP provider; (3) Get the DNS configuration from the ISP: select whether to automatically obtain the DNS server from the ISP; (4) special mode: The route restriction problem exists in some areas of the user; (5) whether to restrict the package size: select whether to restrict the package size; (6) Whether to perform LCP Detection: ADSL disconnection detection. Www.2cto.com

4. DHCP connections are distributed dynamically by the ISP provider. DHCP + connection: DHCP Access Mode for special regions.

5. The static route entry of the manually set wa n port is displayed on the WAN static route. The expression format of the static route is 202.104.25.33/16, and the former is the destination IP address or network segment, the subnet mask is followed by the 32-segment expression, and the subnet mask corresponding to 16 is 255.255.255.0. Vi. bandwidth management (1) uplink bandwidth: the rate at which upstream data is allocated to the wa n port. The default value is 102400 kbps (100 MB ). This configuration is important for upstream data cache adjustment and weight. (2) downstream bandwidth: the rate at which the wa n port allocates downstream data. The default value of the router is 102400 k bps (100 M). This configuration is very important for downstream data cache adjustment. (3) Disconnection Detection: You can select this option if you need to check the connection status of static IP and DHCP (Dynamic IP) access methods. (4) clone MAC address: You can change the MAC address of the vrowa wa n port.
The preceding steps are used to set the WAN port of the Alpha router. Note that the preceding configuration takes effect only after restart. This article is from