20 rules to be followed for reloading systems _windowsxp

If one of the following three scenarios occurs, it should be time to consider reloading the system:

1 The efficiency of the system becomes low, the garbage files are flooded with hard disk and scattered distribution is not convenient for centralized cleaning and automatic cleaning;

2 The system frequently goes wrong, and the fault is not easy to locate and solve easily;

3 The system does not start.

Reloading system is a problem we often encounter, there are a lot of noteworthy issues, you know? Before reinstalling the system, it is best to list the backup order:

The first thing you should think of is to back up your data before you get ready to reload the system because of a crash or failure. At this point, be sure to calm down, carefully list the hard drive need to back up the data, write them one by one on a piece of paper, and then back up the control. If your hard drive does not start, you will need to consider using a different boot disk to start the system, copy your data, or hook your hard disk to another computer for backup. In order to avoid the failure of hard disk data recovery, it is best to develop the habit of backing up important data every day in peacetime.

　　 user documentation is a treasure, the first to backup well

In the data that needs to be backed up, the user's document is the first data to consider backing up. If you are an editor or author, you need to back up your manuscript first; If you are a teacher, you need to back up your handouts first; If you are a composer, you need to back up your tracks first ... Typically, the user's document data is placed in the My Documents folder. If the user specifies another folder to store, the appropriate folder will be backed up.

　　 the internet veteran turned blind, only to forget to keep the favorites

Users who often surf the internet tend to have personal address lists. The next time you need to search for similar content, you can easily reach your destination by opening the Favorites folder. When you reinstall your system, if you forget to back up your favorites, the new system you installed will almost always have an empty collection, and you will be blinded by the previously reserved good address. Although you may say, I have Google and other good search engines, but the original step can be in place of the work artificially become more complex, why bother? So, be sure to back up your favorite folders before reloading the system. Windows 2000 favorites are folders under the system partition and the user name in the middle is different for each person.
To keep input high speed, backup input Word Library

Now, the entry of Chinese characters is simply the use of pen type and pinyin type of input method. and the current mainstream pen type and pinyin input method are intelligent components, that is, can automatically or semi-automatic memory user-formed personalized thesaurus. Individual users in the word library with their own characteristics of the input of Chinese characters, the efficiency will be greatly improved. If you reload the system, forget to back up the input method user thesaurus, after the system reload, the input work of the personal vocabulary accumulation work is equivalent to starting from scratch. Therefore, do not forget to back up the input method user thesaurus. User thesaurus generally in the system or folder, some input method itself contains a thesaurus backup interface, the use is very convenient.

　　 mailbox, QQ backup good, all the links can not be broken

Chat tools such as email and QQ are the main contact tools of our modern people. When reloading the system, be sure not to forget to back up your email address book and QQ buddy information. The email address and QQ Chat friend's information can use the corresponding software export function to carry on the backup. To avoid a system crash after this data backup, it is best to develop the habit of regularly backing up these data, the system after the collapse of this loss to minimize. In fact, Foxmail and QQ are quasi-green software, you only need to compress the two software in peacetime folder and save up standby can be.

　　 driver Backup Well, the next time you do not have to find

The first feeling after the installation should be that the screen flash to make your eyes uncomfortable, speakers have no sound. This is because the video card and sound card driver are not installed. If you have other boards or peripherals in your system, you will have to reinstall their drivers. Some users have these drivers copied to the hard drive folder, without the installation disk. At this point, you need to pay special attention to the installation of the system must be a backup of their own drivers.

　　 do not delete the original catalogue, please prepare the installation disk first

If the files under the original system can also be accessed using such as a startup disk, after you decide to reinstall the operating system and end the backup work, do not rush to delete or format your original system, you should calm down to think about the original system partition you need to keep the file. After a second thought, the next thing you should do is prepare your installation CD. Note that you need to set the optical drive as the first boot disk in the system BIOS.

　　 software description or envelope, where serial numbers are available

The installation sequence number is a key thing, if you accidentally lose your installation serial number, but with a new installation, the installation process will not continue. The serial number of the regular CD-ROM should be in a location on the software specification or CD envelope. However, if you are using the beta system provided in some software collection CDs, the serial numbers may exist in a description text in the installation directory, such as SN.TXT files. So, first read out the serial number and record it for later use.

　　 system error missing file, overwrite installation try again

If you are prompted to get fewer files when the system starts, or if some files are out of the question, then you should not be in a hurry to format your hard drive, but you should first attempt to overwrite the installation. The key to overriding the installation is to go into safe mode or boot to DOS, and then execute the SETUP.EXE on the installation CD or other files used to start the installer. Note that during the installation process, you will choose to install the system files in the same directory as the original system. After this installation, most of the problems can be fixed, more importantly, some of the previously installed application software can continue to use.

　　 overwrite installation does not work, remove install new set

If the overlay installation method mentioned above does not solve your problem, then you can start the system with the boot disk and format your system partition using the format command after confirming that the backup work is complete and that all types of drivers are ready. Then execute the SETUP.EXE on the installation disk or the executable file that is used for installation, and do a new installation.

　 If there is no drive disk, another catalog

If the overlay installation method described above does not solve your problem, and you are unsure whether you still have something to back up, or you do not want to format your partition, then you can use a different directory installation method. The method is to use the startup disk to execute the installation file and install the system in a different directory than the previous system. In this way, the original driver is still in the old system directory. If your driver is missing, when the system discovers new hardware, you can follow the system prompts to find the hardware driver in the original directory. When all the hardware drivers are installed, you can safely delete the original system directory.

　 want to experience a new shock, upgrade installation needs to replace

If you are using a lower version of the operating system and you want to experience a new generation of operating systems that the same software company has just launched, you can use the upgrade installation method to achieve your ideas. The method is to run the Advanced operating system installation files directly in the low-level operating system environment. Operating systems are generally backward-compatible, and Windows 98 can be upgraded to Windows 2000 or Windows Xp,windows 2000 to upgrade to Windows XP. Most of the original programs can continue to be used after you upgrade the installation.

　　 difficult to give up old friendships and novelty, please install multiple systems

If you don't want to lose your original low-level operating system and want to experience the glamour of a new generation of operating systems, you can install a dual system. To do this, under a low-level operating system (such as Windows 98), perform the installation files on the Advanced operating system installation disk such as SETUP.EXE, and then choose to install in the new directory during the installation process instead of selecting the upgrade installation. This way, when the installation is complete and the system restarts, a dual system menu appears. The same is true for multiple system installations, but it is best to follow the first low-level, later advanced installation order, otherwise there will be a lot of trouble.

　 hard disk backup installation disk, reload system more convenient

In order to eliminate the trouble of often looking for the installation disk during installation, we can back up the system installation disk to our own computer. Create a folder in the data backup area of your hard disk such as, copy all files from the system installation CD to that folder. It is OK to run the SETUP.EXE or other installation files when you need to reinstall.

　　 if the system does not crash, the partial restore installs quickly

　　If the Windows 98 system does not completely crash, but some system errors are not repaired by ScanDisk or error-correcting software, you can use part of Windows 98 to recover the installer. This installer can be found in the Windows 98 CD folder. The method is: Go to Dos State, enter directory, run Pcrestor, Setup will start. The speed of this installation is similar to the speed of the hard disk installation, and it does not cause data loss. At the same time, when you reset the hardware, you will typically automatically complete