A Problem and Solution for installing Ubuntu10.10 official version

Ubuntu10.10 official version still failed to use the USB flash drive. This problem occurs: After the optical drive is started, a Ubuntu page appears asking you to select a language, and then you choose to install it. Then there is a black screen, and a cursor on the top keeps flashing, then there will be no more details. The result is the same. Then I tried it on another machine, and the installation page was displayed when the cursor flashed a few times. It seems to be a problem with my machine. The problem with the machine is that the motherboard is the SIS motherboard, which is the cause of the installation failure. Solution: boot

The Ubuntu 10.10 official version still failed to use the USB flash drive and switched to the optical drive for installation.

This problem occurs: After the optical drive is started, a Ubuntu page appears asking you to select a language, and then you choose to install it. Then there is a black screen, and a cursor on the top keeps flashing, then there will be no more details. The result is the same. Then I tried it on another machine, and the installation page was displayed when the cursor flashed a few times. It seems to be a problem with my machine.

The problem with the machine is that the motherboard is the SIS motherboard, which is the cause of the installation failure.

Solution: After the language is selected, press F6 to disable acpi, noapic, and nolapic before entering the installation interface;

New Problem: After starting, you must add the three to the system. Otherwise, you will stay on the blinking interface and cannot enter the system.

Solution: before entering the system for the first time, you will see the following startup items when entering the boot interface:

Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery mode)
Memory test (memtest86 +)
Memory test (memtest86 +, serial console 115200)
Windows 7 (loader) (on/dev/sda1)

The first is the normal start of Ubuntu, and the second is the safe mode. First, move the cursor to the normal start item and press e to enter the following changes:

In/boot/vmlinuz-2.6.35-22-generic root = UUID = cb432b6a-e74e-4d81-93fa-9909b2557194 ro single after an empty box plus as just now the cancellation of the three options: acpi = off, noapic, nolapic
Then press Ctrl + x to enter the system. Then, in order to enable grub in the future, go to/boot/grub and modify grub. cfg. The same changes are also made. It is best to change the security mode as well.

This problem is solved. If you want to answer this question, ask the sis motherboard. In addition, the system will prompt the ATI Video card driver, but do not install the driver provided by the system, it will cause a black screen.