Aixnim configuration and client installation system

Aixnim configuration and client installation System 1. Preparation 1. Compile the etchosts file ipmasteripclient2. back up an aixsmitmksysb (cp to nimmksysb; resources can also be created through cd) II. installation and configuration 1. installation of lslpp-l | grep aix nim configuration and client installation 1. Preparation 1. write the/etc/hosts file ip masterip client2. back up an aixsmit mksysb instance (cp to/nim/mksysb; here, resources can also be created through cd) II. installation and Configuration 1. install lslpp-l | grep nim2. set NIM MASTERsmit nimConfigure the NIM Environment --> Advanced Configuration --> IMitialize the NIM Master Only to enter the network name and network interface 2, create and install resources (lpp) type smit nim --> create Perform NIM Administration Tasks --> Manage Resources --> Define a Resourse select mksysb enter Resource name: lppsource_yujing server_of_Resource: master (F4 Select server) Location of Resource: /nim/mksysb/mksysb_6107.img 3. create SPOT resource smit nim --> create Perform NIM Administration Tasks --> Manage Resources --> Define a Resourse select spot and enter the resource name spot_yujing server_of_Resource: master source of install image: lppsource_yujing Location of Resource: /nim/mksysb/4. define the NIM client smit nim --> create Perform NIM Administration Tasks --> manage machines --> define a machine. enter the client commands defined in hosts. 5. install the client system. prepare smit nim --> Perform NIM software installation and Maintenance Tasks --> install and update software select machines or groups select installation type ------------ mksysb select lpp resource lppsource_yujing select spot resource spot_yujing note: accept new license agreements ---------- yes reboot -------- no 6, MKSYSB recovery on the NIM client 1), hmc start from sms, select Setup Remote IPL 2) select the NIC that communicates with the NIM master. 3) IP addresses of the NIM master and NIM client, the gateway and subnet mask are returned to the upper menu, and the connectivity test with the NIM master is performed. 4) select boot option from SMS and network