1. Prepare a USB stick "8g
2. Prepare the WIN10 installation image
3. Create an installation disk using Mac Bootcamp, tick the first 2 options to start creating the installation disk.
4. Restart the MAC system, connect the USB stick to the computer, and press option at startup
5. Pop-up Interface select U-Disk to start
6. After booting in the Windows installation interface, press SHIFT+F10 to bring up the command prompt
7. Execute the following command:
DiskPart into Disk Management tool
list Disk view Current Disk conditions
Select Disk 0 selects the serial number of the portable hard disk, which is generally the largest capacity
Clean clears all information for the selected disk
Exit the Disk Management tool
8. Install the operating system using the installation interface
9. Go to the USB bootcamp directory and install the Apple hardware driver
10. After the driver installation is complete, it can be used normally.
This article is from the "Onmyway" blog, make sure to keep this source http://active.blog.51cto.com/1100981/1854467
Apple Notebooks installed separately WIN10