Originally with the host only mode to construct the intranet environment, but the virtual machine can not access the external network, but in fact, the host is still able to connect the network segment, can not be a good simulation of the real environment.
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/5A/6E/wKiom1T9ZX3ShmuOAAAkMN7EWXw481.jpg "style=" float: none; "title=" 1.png "alt=" Wkiom1t9zx3shmuoaaakmn7ewxw481.jpg "/>
Then someone and I said a way to remove this check box hook, so that the host can not access the network segment
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/5A/6A/wKioL1T9Zpmh6uHwAAFdk2A-Qso373.jpg "style=" float: none; "title=" 2.png "alt=" Wkiol1t9zpmh6uhwaafdk2a-qso373.jpg "/>
However, this method has a drawback, when it is necessary to partition multiple subnets, to create multiple host only virtual network card, it is necessary to generate multiple virtual network cards in the system, the old version of VMware Support 10 virtual network card, the new version VMware11 support 20, minus VMnet0, VMnet1, VMnet8, can only construct 7 or 17 custom networks respectively
And the use of LAN section mode is not limited, very convenient.
1 , Configure LAN section, is the name, do not configure network-related
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/5A/6A/wKioL1T9ZpmT1Rl7AAQcqPMBrwU446.jpg "style=" float: none; "title=" 3.jpg "alt=" Wkiol1t9zpmt1rl7aaqcqpmbrwu446.jpg "/>
2 , you want to select the same LAN on the same intranet machine
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/5A/6E/wKiom1T9ZX6A7Ze_AAJLZLFjCDQ373.jpg "style=" float: none; "title=" 4.jpg "alt=" Wkiom1t9zx6a7ze_aajlzlfjcdq373.jpg "/>
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/5A/6E/wKiom1T9ZX6iftPKAAKEIylzjFw987.jpg "style=" float: none; "title=" 5.jpg "alt=" Wkiom1t9zx6iftpkaakeiylzjfw987.jpg "/>
3 , and finally only need to configure on the network card can be, unrelated network adapter configuration I cleared, keep 5 favor contrast
3.1 can ping each other through
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/5A/6A/wKioL1T9Zpqz9I_0AAIFGDfW8FU630.jpg "style=" float: none; "title=" 6.jpg "alt=" Wkiol1t9zpqz9i_0aaifgdfw8fu630.jpg "/>
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/5A/6E/wKiom1T9ZX7xjBI-AAHwNelP8Bo429.jpg "style=" float: none; "title=" 7.jpg "alt=" Wkiom1t9zx7xjbi-aahwnelp8bo429.jpg "/>
3.2 But the host ping these 2 virtual machines do not pass
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/5A/6A/wKioL1T9ZprQThOEAAHXeYDt8gM024.jpg "style=" float: none; "title=" 8.png "alt=" Wkiol1t9zprqthoeaahxeydt8gm024.jpg "/>
3.3 If you want to connect the intranet machine on the host, you need to pass through the gateway, or 2 virtual machines add block network card
This article is from the "Looking to the Future" blog, please be sure to keep this source http://life2death.blog.51cto.com/7550586/1618744
Building intranet environments with the LAN segment capabilities of VMware Workstation 11