Computer local Connection Limited or connectionless solution

Method One, the easiest way is to try to modify the network

1, we right click on the desktop "Network Neighborhood" in the pop-up menu click "Properties" as shown.

2, then we right click on the "local connection" in the pop-up menu click the "Repair" option!!

3, this will automatically repair, I tried a long time to repair can not solve the problem!

Method Two, commonly used for local connection access (disable/enable)

1, then right click on the Network Neighborhood, in the Properties panel, right click on the "local Connection"-"Deactivate" button!!

2, after a meeting again right click "Local connection->" Enable button! (In fact, you can double-click to deactivate the enabled OH)

Method Three, the computer restarts

1, on the desktop we enter the computer "Network Neighborhood" and then right click on "Local Connection"-"Properties"

2, then in the local connection properties of our Internet protocol (TCP/IP), double-click it into the IP settings interface!

3, here we simply choose to automatically obtain the IP address, and then click OK. Then restart the computer can!!

Method Four (set IP manually)

1, if automatically obtain IP address or not, you can manually set up.

2, we proceed to the 3rd step of method Three, here do not choose to automatically obtain IP address, but "Use the following IP address"

3, then we set their own IP address, IP address 19.168.1.X (X represents 2-255)

4, the DNS server we can set to 8.8.8.8.