Computer mainframe box rear gear opening illustration tutorial

1. The rear flap with the "screwdriver" icon is as follows:

See the box with the figure above, with the "screwdriver" icon on the blank. Use a screwdriver and stab it with a slight force.

2. The rear blank with the blue button is as follows:

The following steps are disassembled: first open the chassis and locate the blue button at the rear blank;

When pressed, the bezel above the blank will open;

Then pull the blank up and out in turn.

Note:

In connection with this problem, do not use a screwdriver to poke open the blank without judgment of the inertial thinking. The second kind of blank material is hard, it cannot be poked open.