Computer network settings for wireless routers in youxun DI-524M

Many people use the youxun DI-524M wireless router, set the computer through the network cable to one of the LAN port of the DI-524M wireless router, and then perform the following settings: 1, the computer desktop, right click on the network neighbor, select properties to display the network connection window.
2. Right-click Local Connection-properties. 3. In the subsequent pop-up local Connection Properties dialog box, select Internet Protocol (TCP/IP) and click the Properties button below. 4. In the window that opens, select automatically get the IP address, click OK, and then return to the previous interface and click Close, when the computer is connected to the DI-524M wireless router of youxun, the computer automatically obtains the IP address. Www.2cto.com
5. After the computer is set up, when the local connection is displayed as connected, for example:
6. Click Start> Run. In the displayed dialog box, Enter cmd and click OK.
7. Enter the MS-DOS Command Prompt window, type ping 192.168.0.1 and press Enter.
8. Reply from 192.168.0.1: bytes = 32 time <1 ms TTL = 64 words appear, indicating that the computer has been connected to the DI-524M wireless router. Now, the IP address of the local computer connection has been set up, hoping to help you. This article is from