Configuration of the 5100se network printer on RHAS3U2 (Figure)

Article title: configuration of the 5100se network printer on RHAS3U2 (figure ). Linux is a technology channel of the IT lab in China. Includes basic categories such as desktop applications, Linux system management, kernel research, embedded systems, and open source.
1. su? Root and enter the root password.
2. type redhat-config-printer and press enter to display ()
If you configure it for the first time, the following box will be blank, without this default printer.
3. click "new ()
4. click forward to see ()
Enter the name of your printer in "name", and enter the description of the printer in "Brief Description". these are the same as adding a printer to windows, so I will not say much.
5. click forward ()
Note: Click "select queue type" and several options will appear. here we want to use a network printer, we will choose the "online" option. jetDiect (if you want to use a printer shared by Windows, select the "Windows (SMB)" option ). Then () appears ().
6. enter the IP address of your printer in the "printer" box, for example, my 192.168.1.123 port uses its default 9100 port.
7. after entering the information, click "forward ():
8. click the "general purpose (click to select a manufacturer)" button to select the correct manufacturer and model ., For example, my HP 5100 (if you do not have a model, you can select the most similar model. for example, if my model is 5100 se but not, I chose 5100), for example ()
9. click "forward" again. a "end and create a new print queue" window will appear, showing the model of the printer you just Selected. if it is correct, click "Apply ". Then you will be prompted to print the test page, but you do not want to test it because it has some problems (the blank page will be printed during the test at this time ).
10. at this time, the page appears again (). click "edit" and select the tab of "printer driver ()
11. note that the available driver on the right is postscript by default. This driver is not a dedicated driver of HP, causing the problem that we cannot print it correctly. here we choose the hpijs driver. Of course, the options for different printers are different here. you can choose the correct driver based on your actual situation. Click "OK" and click "application" to print the data correctly. if you are not at ease, click "test"-> "CUPS test page" above ", print a test page to see ......
OK. so far, we have configured a network printer. I hope this article will be helpful to anyone who uses linux and network printers. if you have any questions, please come to CU for further discussion.