Configure the network using the command line in ubuntu
Source: Internet
Author: User
Before each command, add sudo to configure the static IP address vi/etc/network/interfaces as follows: autoeth0 # It should mean to enable the first Nic ifconfeth0inetstaticaddress192.168.0.2 # IP address netmask1_255.255.0 # subnet mask gateway192.168.0.1 # gateway configures DNSvi/etc/re non-root users before each command sudo
Configure static IP addresses
Vi/etc/network/interfaces
The content is as follows:
Auto eth0 # It should be the meaning of enabling the first Nic
Ifconf eth0 inet static
Address 192.168.0.2 # IP address
Netmask 255.255.255.0 # Subnet Mask
Gateway 192.168.0.1 # gateway
Configure DNS
Vi/etc/resolv. conf
Added content:
Nameserver 61.177.7.1
The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion;
products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the
content of the page makes you feel confusing, please write us an email, we will handle the problem
within 5 days after receiving your email.
If you find any instances of plagiarism from the community, please send an email to:
info-contact@alibabacloud.com
and provide relevant evidence. A staff member will contact you within 5 working days.
A Free Trial That Lets You Build Big!
Start building with 50+ products and up to 12 months usage for Elastic Compute Service
