Desktop WIN7 and OS X Yosemite 10.10.1 dual System Installation Tutorial

Article preface

As an OS X enthusiast, the installation system should be the same as usual, here is just a brief introduction to how to install OS X lazy version in Windows, so that the desktop dual system.

Because the hardware configuration is very different, it may appear in the article is not the same as when you installed the system, but the general process is the same. Before installing, please make sure your model or configuration is suitable, search the same model or configuration has not been successful perfect, in the installation can not be carried out generally because of the Caranga such hardware can not be driven not to cause, use the boot tool configuration to help you smooth installation. All right, here's the basic text introduction.

My configuration

• Computer model           H61MHV desktop PC
• operating system          windows 7 Flagship 32-bit SP1 (DirectX one)
• processors             intel® Celeron (Celeron) G1620 @ 2.70GHz Dual-core
• motherboard                 H61MHV (Intel Ivy bridge–h61 chipset)
• memory   ;              6 GB (Transcend DDR3 1333MHz/Kingston DDR3 1333MHz)
• main drive     &N Bsp       West WDC wd5000aakx-22erma0 (gb/7200 ext.)
• Graphics           &NBSP ;    nvidia GeForce GTX 650 (2 GB/asus)
• display             Miro (Czech Republic) MLO1901 1 901 (18.6 inches)
• sound card                 Realtek ALC662 High Fidelity audio
• network card   &N Bsp             Realtek rtl8168f pci-e Gigabit Ethernet NIC/Yingxiu

The company's office computer Configuration is not well, the current network card and sound card does not support the source driver, you need to install the driver files separately.

Installation process Disk Partitioning

Lazy version If it is not a whole disk system or dual-drive dual-system installation We need to partition two disk space on the current system disk, one for the installation disk and one for the system disk.

I am here is a single drive, want to compress from the last letter 80GB empty to install black Apple.

First click on the desktop My Computer right –> management –> Disk Management , see as shown

In the F-disk right click –> compression –> Input compressed space, here input you want to compress the space bytes, I here compressed 80GB, input 81920, click Compression.

On the compressed 80G disk space, right-click –> New Simple volume, the next step, in the format partition step when you choose not to format this volume.

This step is important, be sure to choose not to format this volume .

Click Done will pop up asking whether to format, click No, do not format. After we have divided the system disk, we need to partition the new system disk 10G space to make the installation disk.

In the new partition 80G empty disk Right click, repeat the above steps, to specify the size of the volume input 10240, that is, in the compression of 10GB space, also choose not to format this disk.

The compressed capacity is filled into 10240, which is 10GB.

The simple volume size is also 10240.

Click Next

Choose not to format this volume

Be sure to click Cancel here

The above completes the partition of our disk, then we need to modify the property format of our system disk.

Format conversion

Need to use the Diskgenius Disk Management tool

Open Diskgenius, select the system disk we just squeezed out, is still left 70GB of the drive letter, press the shortcut key F11, you can also click the right button –> change the partition parameters .

Change system representation, enter uppercase AF, other do not move, click Drive, then click the Save button in the upper left corner to close the software.

Write to Hard disk

Should be for we are hard disk installation so we need to write the lazy version of the system to the hard disk, we finally compressed the 10GB disk, here need to use the hard drive helper.

Open the HDD Assistant and click on Select our lazy system cdr file.

The target disk selects our compressed 10GB installation letter, I am h, and the subsequent selection is written. Cancel all of the following options:

Click the Write button to start writing to the file, this process may take a little time, the process will appear suspended animation phenomenon, do not click Close, waiting to complete, as shown, the log box shows all done,have fun!, that the software has completed the write operation, you can close the software.

Above our boot disk has been finished, next configure the Windows version of the Chameleon Chameleon.

Configure Boot

The EasyBCD and win versions of the Chameleon are required, and these tools are available below this article. Because the EASYBCD program in my system is wrong, so take the internet first.

After downloading and installing EASYBCD , click iso–> below to add a new entry

Name yourself, here is the problem you see when you start, such as Chameleon. Mode select Run from Disk. Path Select the location of the win version chameleon, we usually put in the system packing directory. Version of the Chameleon habitually named Wowpc.iso, you can also change, such as Osx86.iso.

Click Add after the software will automatically initialize the win version of the Chameleon, if there is no response, we can enter in the dialog box.

When you are finished, click View startup item to see if the add succeeds.

The above add Win version Chameleon boot option is complete.

Restart the installation

Next restart the computer to see a more startup item, just the name we set, I set the Mac OS X 10.10. Select this entry to enter.

After entering a lot of hard disk options, we use the left and RIGHT arrow keys to select the installation disk name Yosemite Install (14B25), enter the installation system.

Program load run may take a little time to wait patiently, see this interface choose the language we need, here to choose Simplified Chinese. Click Continue. The picture is too big, for the concise appearance of the article I only intercepted a part.

Don't be too busy at this point to continue, we need to use the System Disk utility to format the system disk once. At the top, click Utilities –> Disk Utility.

Select the system disk you want to operate, is the system disk that we divide out, I show here 1, desk0s8–>2, erase –>3, format: Mac OS Extended (journaled) –>4, name (optional) –>5, Erase button.

Pop-up Tip click Erase

Close the Exit Disk utility, click Continue, and agree to the terms.

Will pop up asking whether agree, click Agree, next select the disk to install, select the system disk we just erased osx86, click Continue.

At this time the installation began, do not be busy happy, install 10.10.1 need to install two times, the first should be the detection system, need more than 10 minutes, patiently waiting for prompt completion.

After running the system will automatically restart, this is to remember to re-enter the Chameleon boot interface, or choose our installation disk Yosemite Install (14B25), this time is the real installation.

Now is the real installation, the system takes 22 minutes to complete the installation, my installation process about half an hour or so, this is not to care about it, drink some tea smoke slowly wait.

Automatically restarts the system after installation is complete

Reboot into Windows, copy the extra directory in the installation disk to the OSX86 system packing directory, this must operate, otherwise cannot enter the system, after the replication is complete restart.

After restarting we select the chameleon once again you go to the entry, enter after selecting OSX86 system disk for a series of settings

After entering, we started to set up our Mac. Set the region, select China and continue.

Select keyboard layout and Input method, click Continue.

Network settings, here choose My Computer does not link to the Internet, this we wait to enter the system after the specific settings, if you are sure that your network card or something is driving can also try to set it.

Ask how do you want to transfer information? Select: Do not transfer any data now, click Continue.

Terms and conditions, click Agree and continue.

Next set up personal information and computer name, this with personal preferences, where the settings are not satisfied can also enter the system after modification.

Remember to cancel the time zone based on the current location, because you are not connected to the network or manually set it up well, reduce a little time.

Send the diagnosis to Apple, this is not necessary, cancel, click Continue.

Wait a moment and you'll be able to enter the system.

Installation Summary

Finally, the article is finished, two hours, this is only the time to write the article, the writing is not good technology is also worse if there is anything wrong in the article, please leave a message pointing out that I will revise as soon as possible.

This is not perfect, but also need to install a sound card driver and so on a series of operations, not discussed here.

There are many installation tutorials on the Internet to remove a lot of useless drivers, I personally still want to maintain the integrity of the system, if you encounter a five-country diagram can not be started or cannot be installed by starting the boot tool chameleon or four-leaf grass configuration to perfect, there is no need to come up to delete a lot of things.

In addition to the EASYBCD from the Internet, all the text and map are installed in my installation. This article is only for novice reference study, reproduced please indicate the source!

If you encounter problems during installation, please add QQ Exchange Group: 8995415. or reply to the discussion in this article. The article is related to the tools, this site has been downloaded, please search for download by yourself.

Desktop WIN7 and OS X Yosemite 10.10.1 dual System Installation Tutorial