Many may not have a special understanding of Huawei router configuration. Here, we mainly explain the basic statements of Huawei router configuration in the privileged mode, common user mode, privileged user mode, and global configuration mode.
Enable the Huawei router configuration to enter the privileged Mode
- Exit to global configuration mode
- Enter the Ethernet interface configuration for ine0
- Ipaddxxx. xxx. xxx. xxxxxx. xxx Add the IP address and mask, and assign
- Exit to global configuration mode
- Iproute0.0.0.00.0.0.0s0 add route table
- Enapassword Password
- Write
- Exit
-
General user mode for Huawei router configuration
- Enable transfer to privileged user mode
- Exit
- Help System help
- Language mode switch
- Ping to check whether the network host connection and host are reachable
- Show Displays System running information
- Telnet Remote Logon
- Tracert traces the routers at the destination
-
Privileged user mode for Huawei router configuration
- Clear statistics
- Clock of clock management system
- Configure enters global configuration mode
- Debug
- Disable returns normal user mode
- Download new software and configuration files
- Erase erased FLASH Configuration
- Exec-timeout
- Exit
- First-config sets or clears the initial configuration flag
- Help System help
- Language mode switch
- Monitor enables the user Screen debugging information output
- No. Disable debugging.
- Ping to check whether the network host connection and host are reachable
- Reboot router restart
- Setup configure vro Parameters
- Show Displays System running information
- Telnet Remote Logon
- Tracert traces the routers at the destination
- Unmonitor
- Write saves the current configuration parameters to FLASHMEM
Global configuration mode for Huawei router configuration
- Aaa-enable configuration AAA (authentication, authorization, and billing)
- Access-list configuration standard access table
- Set static arp population for ARP
- Chat-script generates an execution script for modem.
- Custom-list create custom queue list
- Dialer-list create dialer-list
- Dram-wait sets DRAM wait Status
- Enable modify ENABLE password
- Exit to exit the global configuration mode
- Configure firewall Status in firewall
- Flow-interval
- Frame-relay frame relay global configuration command set
- Ftp-serverFTP Server
- Help system help commands
- Host add host name and its IP address
- Modify host name
- Ifquelen: Change the interface queue length
- Interface selection configuration interface
- Ip Global IP configuration command subset
- Ipx global IPX configuration command subset
- Loghost
- Logic-channel Configuration Logical channel
- Login starts EXEC login verification
- Modem-timeout
- Interfaces used by multilink users to configure multilink
- Multilink-user: interfaces used by multilink users
- Natserver sets IP addresses for FTP, TELNET, and WWW services
- No. Disable some parameters.
- Priority-list create priority queue list
- Router start route Processing
- Settr
- Snmp-server modify SNMP Parameters
- Tcp configuration global TCP Parameters
- Timerange start or stop time zone
- User is added to the system for PPP authentication
- Vpdn setting VPDN
- Set vpdn group
- X25X. 25 protocol group Layer
-