Dump for IBM minicomputer AIX system

IBM minicomputer AIX system dump method 1. prerequisites: www.2cto. the comsysdumpdev settings are correct. the related values should be as follows: # sysdumpdev-lprimary/dev/lg_dumplvseco... information IBM minicomputer AIX system dump method 1. prerequisites: the settings of www.2cto.com sysdumpdev are correct. the related values should be as follows: # sysdumpdev-l primary/dev/lg_dumplv secondary/dev/sysdumpnull copy directory/var/adm/ras forced copy flag TRUE always allow dump TRUE dump compression on ii. dump generation method: www.2cto.com P4 minicomputer dump method: click the yellow button under the front panel power control switch (white), on the screen 0C2 is displayed, indicating that dump is in progress. after 0C0 is displayed on the screen, it indicates that dump has been completed. you can restart the P5 minicomputer for the dump method (only this method proves effective): 1. normally, the control panel stays in the 01 state. First, press the upper or lower key to convert it to 02 (FUNCTION 02). The panel is displayed as follows: 02 _ 2. press the OK key to enter function 02. when you see A minor sign after A, press the OK key to adjust the minor sign to the end of N. then, use the upper or lower key to change N to M, then confirm, then confirm, and exit function 02. (M indicates the maintenance mode) 3. press the upper or lower key, change 02 to 22, and press the OK key. A1003022 is displayed on the panel. Press OK again. 11 is displayed on the panel, change 11 to 22 and press OK. 4. dxxx is displayed on the panel, indicating that Dump 5 is generated. Step 3. adjust control panel to N (normal startup) Mode 3. Dump collection method: # snap-r #/tmp/ibmsupt/snap generated by snap-ac. pax. Z is downloaded from a notebook in bin mode.