Enable the automatic boot function for the computer to work on time

At present, most of my colleagues in office work cannot do without computers. After arriving at the post every day, you repeatedly sign in, start up, and work. But have you ever wondered whether to enable your computer to automatically start up at a certain time of the day? It is not only practical, but also "dazzling" among colleagues. It is a good proposal. This seems impossible. It is actually very simple. As long as you know a little bit about the computer, you can do it completely. It doesn't matter if you don't understand it. follow the steps below to do the same.

 

Figure 1

Figure 1

First, press the delete key after the boot, which is a commonly used delete button (see figure 1), and then enter the BIOS interface. Although it is a blue world full of eyes, do not be afraid, no problem.

 

Figure 2

Figure 2

On the BIOS settings page, select the "power" option (see figure 2) To Go To The Power Management window. Some machines are in "power management setup.

 

Figure 3

Figure 3

By default, the "Automatic Power Up (timed boot, resume by alarm for some machines)" option is disabled. move the cursor to this option (see figure 3 ), use the "Pagedown" key to change "disabled" to "enabled ".

 

Figure 4

Figure 4

In this case, the "Automatic Power Up" option will pop up a menu with three options: "disabled, every day, and by date" (see Figure 4 ), it indicates "forbidden, daily, and specified date ". For office workers, we recommend the second item. A date and time setting will pop out.

 

Figure 5

Figure 5

Congratulations, it's half done. move the cursor to "time alarm (boot time)" and set it with "Pageup" and "Pagedown" (see Figure 5 ). If you set a date, you need to set it on "date alarm. Of course, different motherboard functions are different. Some can be used only once for each setting, while others can set a cycle.

 

Figure 5

Figure 6

In the last step, this is really a success, that is, select "Exit saving changes" (see Figure 6), save and exit. Most machines have hotkeys, usually F10. Then the machine restarts. OK, congratulations, your machine will automatically go to work.

How do you know whether your current machine can automatically start work every day? Of course, the premise is that you should not be late, or even if it is started up, it will still wait there for a long time, don't expect it to work on its own. Finally, we would like to remind you that you must turn off the power during the weekend, otherwise it will still start on time on Saturday, although you can set the BIOS to be disabled, however, it is always easier to turn off the power supply.