Fedora9 online solution

To solve the problem of Fedora9 surfing the Internet, pay attention to the following two points: 1. to access the Internet, you must first activate the NIC, that is, eth0, and then activate adsl (if you access the Internet through adsl), also known as ppp0; 2, I don't know whether it is a problem with the fedora9 system or a modern problem. adsl activation will fail and a bunch of english will appear. No matter whether it is, it can be activated for the second time after restart. Is it a coincidence? The procedure is as follows: 1. Open the "Network Configuration" dialog box and choose "Main Menu"> "system"> "manage ".

To solve the problem of ora 9 surfing the Internet, pay attention to the following two points: 1. to access the Internet, you must first activate the NIC, that is, eth0, and then activate adsl (if you access the Internet through adsl), also known as ppp0; 2, I don't know whether it is a problem with the fedora9 system or a modern problem. adsl activation will fail and a bunch of english will appear. No matter whether it is, it can be activated for the second time after restart. Is it a coincidence?

The procedure is as follows:

1. Open the "Network Configuration" dialog box

Main Menu-> system-> Management-> network, enter the Administrator (root) password set during installation in the displayed window, and open the "Network Configuration" dialog box.

2. View Nic activation status

If it is normal, you can see eth0, which should be activated. If you do not see anything, your network card may not be correctly recognized. You have to find related Nic information to install the corresponding driver correctly. Then let's take a look at the content in this section. If eth0 is not activated, click the activate button at the top. If it is activated normally, go directly to 3.

If you still cannot activate eth0, try the following methods:

(1) Click the edit button above to open the "Ethernet device" dialog box.

(2) Click "static IP Address" single region.

(3) In the address box, enter 192.168.1.12.

(4) In the "subnet mask" box, enter 255.255.255.0.

(5) then click "OK" to exit this dialog box.

(6) Click the activation button at the top of "network configuration" again. It should be activated normally.

3. Add and activate ppp0

Click "new" at the top to open the "Add new device type" box.

In the device type on the left, select "xDSL connection" at the bottom and click "forward.

On the New Page, enter any English identifier in the "provider name" box. Select "Normal" in Account Typ. In "Login Name" and "password", enter the user name and password that the network provider gives you. Click "Forward" to return to the "Network Configuration" dialog box. Now there are multiple ppp0 configurations under eth0. Click the device and then click "Activate. Normally, we can see that ppp0 has been activated. It indicates that the Internet is now available.

If ppp0 cannot be activated, it is most likely that you need to enter the "Login Name" or "password" above, and the password is not entered correctly. You can click the "edit" button above to modify the settings.

You can click the edit button to go To the xDSL Configuration box and select the activate device when the computer starts. This will automatically log on to the network when the computer starts up.