Home use Huawei AR200 (AR207) ADSL Pppoeoa dial-up Internet

New home internet needs a better ADSL router, put in the weak box, network for routers + 2 APs,

If the home is fiber-optic Internet may require the Pon interface router, hehe.

An enterprise router that supports command-line debugging is required, and Ar207v,600￥ is selected for price reasons.

The following is only a brief description of the ADSL dial-up network configuration, about Ac+ap set roaming configuration manual described more detailed, not listed.

In fact, ADSL dial is Pppoeoa, specific configuration reference manual can, here to supplement the manual is not the place.

#acl name atm0/0/0 2999 Rule 5 Permit

Rule for NAT

#dialer-rule dialer-rule 1 IP Permit

Rule for dial

#interface Dialer1 Link-protocol PPP PPP CHAP user USERNAMEFORADSL PPP chap password CIPHER PASSWORDFORADSL PPP pap local- User USERNAMEFORADSL Password PASSWORDFORADSL

///////************* input password manually, don ' t copy/paste. Please enter the password manually, please do not paste the password

PPP IPCP DNS admit-any PPP IPCP DNS request MTU 1440 TCP ADJUST-MSS 1460 IP address ppp-negotiate dialer user Arweb dialer Bundle 1 Dialer-group 1 Nat Outbound 2999

Dialer for PPPoE

#interface Vlanif1 IP Address 192.168.1.1 255.255.255.0 DHCP Select interface DHCP server Dns-list 202.103.24.68

VLAN 1 for client PC

#interface atm0/0/0 PVC 0/32 Map Bridge virtual-ethernet0/0/0

///////*************DSL Interface PVC, 0/32 for Wuhan

#interface virtual-ethernet0/0/0 pppoe-client Dial-bundle-number 1

Virtual Interface for PPPoE dial

#ip route-static 0.0.0.0 0.0.0.0 Dialer1

Default route

First, your ATM port is going to be activated.

<Huawei>dis int dialer1Dialer1 current state : UPLine protocol  current state : up  (spoofing) description:huawei, ar series, dialer1  Interfaceroute port,the maximum transmit unit is 1440, hold timer  is 10 (sec) internet address is negotiated, 27.16.226.91/32link layer  protocol is ppplcp initialphysical is dialercurrent system time:  2015-03-04 22:00:39+08:00    last 300 seconds input rate 0  bits/sec, 0 packets/sec    Last 300 seconds output  rate 0 bits/sec, 0 packets/sec    realtime 0 seconds  input rate 0 bits/sec, 0 packets/sec    realtime 0  seconds output rate 0 bits/sec, 0 packets/sec    input: 0 bytes     Output:0 bytes    Input bandwidth utilization  :     0%    Output bandwidth utilization :     0%bound to dialer1:0:dialer1:0 current state : up ,line protocol  current state : UPLink layer protocol is PPPLCP opened,  ipcp openedpackets statistics:  input packets:0,  0 bytes                  output packets :0, 0 bytes                                                            <Huawei>dis dsl inter atm0/0/0 ----------------------------------------------- -------------- dsl driver and phy status      training  Status                       : showtime      transmission mode                      : ADSL2+ AnnexM      Line Status                            : no defect      downstream max.  attainable raTe (Kbps):  25544      upstream max. attainable rate (Kbps)   : 2509      downstream actual net data rate (Kbps):  13311      upstream actual net data rate (Kbps)   : 506      downstream snr margin (DB)              : 25.5       Upstream snr margin (DB)                : 32.5      downstream attenuation (DB)             : 8.5      Upstream  Attenuation (DB)              : 7.1       dowNstream output power (dBm)          : 18.4       upstream output power (dBm)             : 12.4      Downstream total cells                : 205127736       Upstream total cells                  : 7795007       downstream data cells                 : 7344197      Upstream data cells                   : 569829       downstream bit errors                 : 0      Upstream bit errors                   : 0       Total drop cells                      : 0       Downstream total ES count             : 0      Upstream total ES count               : 0       Downstream total SES count            : 0      upstream total ses count              : 0      downstream total uas  count           : 3637       Upstream total UAS count              : 3637      Total AS count                         : 6534 Line modulations      G.Dmt                                  : Enabled       t1.413                                : Enabled       ADSL2                                 :  enabled      annexl                                 : Enabled      ADSL2+                                 : Enabled      AnnexM                                 : Enabled Line capability       Bitswap                               : On       SRA                                    : Off      Trellis coding                         : On Board version      vendor ID                              : 0xB5 0  "BDCM"  0 0      vendor serial                          : 00000000000000000000000000000001       Board ID                              : 963281TAN       Software version                      : 4.06L.03       Bootloader  (CFE)  version              : 1.2.37-106.24      dsl phy and driver version            : a2pd037f.d24f      build  timestamp                       : 20131205_1738 ATU-C version       vendor ID                             : BDCM:0x939e       vendor number                         : 0x939e ------- -------------------------------------------------------

Dial if not successful, can debug view, nothing but debug PPP and PPPoE

Term mo

Term debug

Debug PPP All

Debug PPP LCP Interface Dialer 1

After success, you can see that the dialer interface gets the address.

This article from "Mininer" blog, declined reprint!
Home use Huawei AR200 (AR207) ADSL Pppoeoa dial-up Internet