How can I access the Internet with only one vswitch on two computers?

First, you must prepare a crosstab (used to connect a cat to a vswitch ). Pull the network cable to the computer through the switch

On, it is best to use the XP system, this is the most convenient to set.

In the future, whoever dials the computer will become the host.

Host (Computer Used for dialing) settings:

Right-click Network Neighbor-→ properties-→ right-click Local Connection-→ properties-→ General

In the Internet Service (ICP/IP) attributes, set as follows:

Click to select: Use the following IP Address

Enter the IP address 192.168.0.1.
Subnet Mask: 255.255.255.0
Preferred DNS server: 202.96.128.86

, I entered DNS in Guangzhou)

Then set up the shared connection. Of course, you must set up a dial-up connection on your computer.

If you have a dial-up connection, create a new connection. Open the "My network neighbors" attribute and you can create one in it. Set

Shared connection method: Right-click your dial-up connection, select properties, and click Advanced to allow

This network user uses the Internet to connect to the computer. Click "OK". An additional one is displayed.

Hold the dial-up connection icon in your hand, indicating that you have set up a shared connection to access the Internet.

Other computer (Customer Service) settings:
IP Address: 192.168.0.5

Repeat with others. Here I fill in 5)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1 (the IP address of the host) if the network cable is connected after the gateway is set

No problem. The system will automatically find the local connection. After the local connection is received, there will be one more attribute in your network neighbor.

Internet gateway icon.
Preferred DNS server: 202.96.128.86

, I entered DNS in Guangzhou)

After all the settings are complete, all the computers on the host can share the Internet after dialing.

The host can be directly connected by dialing, but you must change the settings according to the steps mentioned above.

Notes!
1. Do not repeat the IP addresses of all computers.
2. The customer service machine gateway must be filled with the host's IP address and DNS address.
3. Check whether the host "allows other network users to connect to the computer over the Internet ".

Then, as long as one dial-up is used, it is the host, and the other server does not need to be used for dial-up.