How can I view the IC card gas meter readings and remaining quantities?

Now the newly built buildings are using IC card gas meter, to get the house when the use of IC card gas meter is not seen in the manual. Very many people may be distressed by this. Here is how to view the IC card gas meter readings and the remaining amount.

Product appearance

optional features

watermark/2/text/ahr0cdovl2jsb2cuy3nkbi5uzxqvdgvzdgnzx2ru/font/5a6l5l2t/fontsize/400/fill/i0jbqkfcma==/ Dissolve/70/gravity/southeast "/>

Product advantage

main technical parameters

view IC card gas meter readings and Remaining amount, prepare IC card and flashlight, usually gas meter is installed below the stove, darker than

move the gas meter below the battery cover on the upper right side. Open the battery cover

watermark/2/text/ahr0cdovl2jsb2cuy3nkbi5uzxqvdgvzdgnzx2ru/font/5a6l5l2t/fontsize/400/fill/i0jbqkfcma==/ Dissolve/70/gravity/southeast "/>

Insert the gas card face up into the gas meter and you will hear a beep.

The above shows how many cubic meters of gas are used, the remaining amount shown below

The correct way to recharge the IC card:

When using the IC card to recharge, you should first confirm that the gas meter voltage is normal. The battery should be replaced when the voltage is low. Insert the IC card with a yellow chip and a side marked with an arrow upward into the gas meter IC card and push it. The indicator changes on the watch table, after which the indicator light is on and the buzzer reads for about 30 seconds. Then remove the IC card. The recharge is complete. Or observe the volume display on the LCD screen, after about 30 seconds, then remove the IC card, charging has been completed.

The user pulls the self-closing valve to the position where you can use the Green Line.

Copyright notice: This article blog original articles, blogs, without consent, may not be reproduced.

How can I view the IC card gas meter readings and remaining quantities?