How the computer adds a wireless profile (WINXP/WIN7/WIN8/WIN10)

How does [Windows XP] Add a wireless configuration file?

Hidden router's SSID (wireless signal name), the computer can not search the router's wireless signal, you need to add a wireless profile, manually enter the router's SSID, wireless password and other parameters to connect the router's wireless signal. This article details how Windows XP system computers manually add wireless profiles.

1, find the Network Neighborhood on the desktop, right-click the attribute . To find the wireless network connection , Right-click the attribute , as shown below:

2, find and click the wireless network configuration , click Add , the following figure:

3, in the Open wireless network Properties page, manually enter the router's SSID, wireless password and other parameters, check even if this network is not broadcast, also to connect , click OK , the following figure:

4, back to the wireless network connection Properties page, you can view the preferred network has been added zhangsan this wireless profile, click OK , the following figure:

5, the above steps to complete the operation, right key Wireless network connection Click to View available wireless connection, Click Refresh Network list , You can view the status of the wireless network connection that is now connected, as shown in the following figure:

Do you need to add the wireless profile again after the computer restarts?

The wireless profile is added, the wireless signal is automatically attached to the router after the computer restarts, and the wireless profile is not required to be added again.

1. Click on the Network icon of the wireless signal in the lower right corner of the computer, click Open Network and Share center (or right-click the network on the desktop, click Properties , go to the Network and Share center page), locate and click the Manage wireless network , as shown below:

2, in the open management of the wireless network page Click Add , the following figure:

3, choose to manually create a network configuration file , as shown below:

4, manually enter the router's SSID, wireless password and other parameters, check even if the network is not broadcast also connected , click Next , the following figure:

5, wireless Profile add complete, click Close , the following figure:

6, in the management of wireless network page can see has been successfully added Zhangsan profile, click on the computer in the lower right corner of the network icon Wireless signal, wireless network in the search list shows the wireless signal has been connected, the following figure:

[Windows 8] How do I add a wireless configuration file?

1, right key computer Desktop Wireless Signal Network icon, click on the Open Network and Sharing Center (or right-click the network on the desktop, click Properties , go to the Network and Share center page, and click Set up a new connection or network , as shown below:

2, choose to manually connect to the wireless network , click Next , the following figure:

3, manually enter the router's SSID, wireless password and other parameters, check even if the network is not broadcast also connected , click Next , the following figure:

4, wireless Profile add complete, click Close , the following figure:

Click on the network icon of the wireless signal in the lower right corner of the computer desktop to display the wireless signal connected in the Search wireless network list

The following figure:

Note: When the router is not connected to the extranet, the wireless signal will display restricted , when the computer and the router wireless is connected, the computer can log into the router's management interface. The following illustration:

win10 Add wireless Profile Tutorial

1, right the network icon for the lower right corner of the computer desktop wireless signal, click & nbsp Open Network and Sharing Center   (or   right-click     on desktop; Network , click &NBSP Properties , enter   network and Sharing Center   page, and click   Set up a new connection or network , as shown in the following figure:

2, select   manually connect to wireless network , click   Next , as shown in the following figure:

3, manually enter parameters such as the SSID of the router, wireless password, and so on, check   , even if the network is not broadcasting also connect , click   next , as follows:

4, Wireless Profile add complete, click   Close , the following figure:

p>

Click the network icon for the wireless signal in the lower-right corner of the computer desktop to display the wireless signal connected in the search wireless network list, as follows:

:

Note: When the router is not connected to the extranet, the wireless signal will display restricted , when the computer and the router wireless is connected, the computer can log into the router's management interface. The following illustration: