Share the Internet by sharing a local connection (wired, wireless)
Note: Confirm that the computer that shares the local connection is the gateway computer has two network cards (one of which is a wired or wireless network card), and has a switch or hub and other networking equipment, computers and computers through network equipment or wireless LAN connection.
First, configure the gateway computer
1, open one of the properties of the network card, you must ensure that this network card can be connected to the Internet normally. The following figure:
2, click the Sharing tab, and then select the Allow other network users to connect through this computer's Internet connection check box, and point to exit.
Note: If you have only one network card, the Sharing tab will not be available.
3, set the local connection after the completion of the local connection icon will appear on the shared flag, the following figure:
4, after the completion of the local connection settings, another network card (wired, wireless) IP address has been manually designated by the system, the following figure:
Second, configure the client computer
1, open the client computer network connection properties, the following figure:
2. Double-click Internet Protocol (TCP/IP) on the image above to open the Internet Protocol (TCP/IP) Properties window and select "Get IP address automatically" and click "OK" to exit.
3, if the client is a wireless network card, the search in the list of wireless networks to select the corresponding SSID name and then click "Connect" to achieve wireless sharing Internet.