SAN Switch license activation step 7450-7451 does not support cascade by default, that is, E_Ports, requires activation licenses for fc # Full Fabric (if MES is upgraded, Full Fabric number is fc ), A maximum of 10 Fabric servers are supported. The following describes how to activate the cascade license, that is, Full Fabric: www.2cto.com 1. find a yellow-colored license list in the product package, marked with Feature 7450 (or 7451)-B6 Full Fabric Upgrade 2 below the IBM Logo. use the following method to obtain the LicenseID of the vswitch. The LicenseID is the WWN a of the vswitch. GUI: log on to the vswitch through a web browser. The default user name and password are admin/password. If the user name and password of the user is. for Version x and later, click Switch Info. The licenseID information B is displayed. CLI command line: use telnet to log on to F8. The default IP address is 10.77.77.77, and the default user name and password are admin/password. Enter licenseidshow in the command line, press enter to display the licenseID information. WWN will start with 10: 00: xx: x X: xx. This value is unique to the vswitch. 3. log on to www.ibm.com/storage/key 4. enter your email address, LicenseID, and Transaction Key in the license list. Note: Enter the LicenseID in the World Wide Name area. The Transaction Key is case sensitive, this serial number can only be activated on one vswitch. Do not disclose this information before registration. Keep this information after registration for future reference. 5. after the above information is submitted, the Feature Activation Key will be generated on the webpage. Please record this information www.2cto.com 6. activate license. GUI: After logging on to the Web, go to Switch Admin-> License-> Add, Add the Feature Activation Key, and then confirm B. CLI command line: telnet login, use the licenseadd command to activate, format: licenseadd [Feature Activation Key] 7. confirm activation. GUI: After logging on to the Web, go to Switch Admin-> License. If "Fabric" is displayed in the features column in the license window, B is activated successfully. CLI command line: telnet login, use the licenseshow command, enter the license information on the screen, and press Enter. If "Fabric License" is displayed, the activation is successful.