How to burn BIOS to SD card inside

For TINY6410 ADK Models

1, SD card format FAT32 or FAT format

2. Insert the SD card into the USB interface card reader and plug it into the USB port of the PC.

3. "Run as Administrator" Sd-flasher.exe (under Tiny6410-dvd-b-1/tools)

4. "Browse" to select "Superboot-6410.bin" (under Tiny6410-dvd-b-1/images)

5, "Relayout" re-partition SD card

6, "Scan" scanning SD card drive letter

7, click "Relayout" again, will pop up the prompt dialog box, select "Yes"

8. Click "Scan" again to scan the SD card letter.

9, "fuse" burning bios to SD card drive letter

10, Burn Write Success "Reports" box prompt: "1 succeeded"

Detect if the SD boot card is successful

1, Development Board jumper Switch S2 dial to Sd-boot

2. Insert the SD card into the SD card holder of the Development Board

3, connect the USB to serial port line + serial line, set up the SECURECRT and connect.

4, develop board power, observe whether the message in SECURECRT is the BIOS menu interface.

How to burn BIOS to SD card inside