Note that this is not meant to use wireless WiFi on a computer that uses wired internet
In some corporate environments, you need to use both wireless and wired networks:
1) The wired network is connected to the LAN router as a local connection so that it can connect with other computers;
2) wireless network is the use of Wireless LAN connection network router for Internet access;
This method applies to the following 2 or other similar situations:
A. Wired local area network can only connect to the internal network, wireless network can connect the external network
B. Intranet using wireless router + wireless network card building, while the intranet computer through the wireless router can be normal Sisu network, wired local network is only used in local area networks of several computers self-built wired LAN
On XP, once the use of wired network and wireless network, usually the computer software preferred wired network for networking, this time if the cable network can not or prohibit Sisu network, it will cause the computer can not access the Internet, the solution:
1) Network Neighborhood-"Right-click property" into "network Connection", main Menu "Advanced"-"Advanced settings"-Adjust the order of "local Connection" and "Wireless network Connection";
1th) method is not necessarily valid, preferably using the 2nd below) method
2) in Network Connections, right-click the properties for local area Connection and wireless network connection-Internet protocol (TCP/IP) Properties-Advanced-IP Settings-Cancel automatic metric-in interface metric-local Area Connection fill in 20, wireless network connection fill in 15 (or other numbers, typically within 30, as long as the number of hops in the wireless network is less than the local connection)
Vista/win7 above the system will be automatically selected, if there is a problem can also refer to the above to set
How to make a computer use a wired local network and a wireless network to surf the internet