How to set a password for a TP-Link Wireless Router _ how to set a wireless password for a tp-link router tutorial, tp-linktp

How to set a password for a TP-Link Wireless Router _ how to set a wireless password for a tp-link router tutorial, tp-linktp
The following describes how to set a wireless access password for a TP-Link wireless router. If your tp link wireless router has not set an Internet connection, refer to the topic of setting a tp link wireless router. With the wireless setting function, you can safely and conveniently enable the wireless function of the router for network connection.

1. log on to the vro settings page.

Open a Web browser and enter the IP address 192.168.1.1 of the router in the address bar of the browser. The logon interface is displayed. Enter the user name and password (the default username and password are admin ), click OK.

2. After logging on, click Wireless settings on the left-side menu bar, as shown in wireless security settings.

3. Click wireless security settings, as shown in.

On the Wireless Security Settings page, you can choose whether to disable the wireless security function.

A. If you do not need to enable the wireless security feature, check the disable wireless security option to disable the wireless security feature.

B. If you need to enable wireless security, select one of the three security types on the page for wireless security settings.

This page provides three wireless security types: WEP, WPA/WPA2, and WPA-PSK/WPA2-PSK. Different security types, different security settings, we introduce the encryption method of WPA-PSK/WPA2-PSK (recommended to use this encryption method, security is also the best ).

4. Introduction of WPA-PSK/WPA2-PSK Encryption

Authentication Type: This option is used to select the security mode used by the system, that is, automatic, WPA-PSK, WPA2-PSK. (This is automatically used by default ).

Encryption Algorithm: Here is the encryption algorithm, such as the default AES.

PSK password: Set the password of your wireless router (no less than 8-bit password)

Group Key Update cycle: This is the default update cycle.

If the vro performs wireless security settings, all computers in the wireless network must be set according to the security settings. For example, the password settings must be the same, otherwise, the router cannot be connected wirelessly.