How to set AP mode for TP-WR842N routers

tp-wr842n Router set AP mode first step, operating computer settings

1, set up operating computer network parameters

Please set the wireless network card that operates the computer to manually specify the IP address.

2, wireless connection Mini Router

The computer searches the mini router for a wireless signal (TP-LINK_XXXXXX) and connects.

TP-WR842N Router Set AP mode The second step, landing router management interface

1, enter the administrative address

Open the browser on your computer's desktop, empty the address bar and enter 192.168.1.253, and the page will eject the login box.

2, Login Management interface

In the Login password box, enter the default administrative password for the router. Admin, click Login to enter the Admin interface.

TP-WR842N Router Set AP mode step three, set up the router according to the Setup Wizard

1. Start Setup Wizard

Enter the management interface to the router, click the Setup Wizard and click Next.

2. Select working mode

Select the AP. Access point mode, click Next.

3. Set Wireless parameters

Modify SSID (Wireless signal name), set at least 8-bit wireless password in the location of PSK password, click Next.

4, Setup complete, restart the router

Click Reboot and click OK for the pop-up dialog box.

TP-WR842N Router Set AP mode step fourth, connect lines and surf the internet

Connect the front-end network to the router's cable interface as follows.

The computer connects to the changed wireless signal (Zhangsan) and sets the IP address to be automatically acquired. If you can access the Internet correctly, the AP mode settings are successful.

The AP mode settings are now complete. Other wireless terminals connect to the Internet with a set of wireless signals.