TL-WDR6500 Internet control network topology
A small enterprise uses TL-WDR6500 as a router, the need to achieve the manager computer is not limited, all employees can only access specific websites and applications at work time, other time online is not limited. Create the following configuration table as required:
Note:The preceding parameter is for reference only. When setting a rule, the rule description name can be customized.
Log on to the vro management page and clickInternet access control>Schedule>Add a single entry, AddWorking hours, Detailed settings are shown in the following figure:
Add rules for other time periods according to the same setting method. The general rules are as follows:
1Enter the domain name of the target website
ClickInternet access control>Access target>Add a single entry, Add Company website domain name (take www.tp-link.com.cn as an example), as shown in the following figure:
2Enter the targetIPAddress
Add an access target. Add a DNS service as an example:
Note:You can also select the service you want to set in the common service port number.
3Add other rules
Use the foxmail client software to send and receive emails. Common ports are:25,110,53SMTPS Port465And IMAPS ports993,
Common QQ logon ports:8000,443.
Add rules in sequence. The specific rules are as follows:
Note:: The relevant parameters in this article are for example only. Specific open ports and destination IP addresses are subject to actual requirements.
1Add manager
ClickInternet access control>Host List>Add a single entry, Add the manager's MAC, as shown in the following figure:
Note:Set the manager's MAC address to prevent other computers from modifying the IP address to obtain the Internet access permission.
2Add employees
Because the number of employee MAC addresses is large, adding one by one will multiply the rule list, which can be achieved through IP address segments, as shown in the following figure:
Note:The IP address segment may contain the manager's IP address. The two do not conflict according to the matching rules.
The rules are as follows:
1, Add manager Internet rules
ClickInternet access control>Rule Management>Add a single entryTo add access rules for the manager computer, as shown in the following figure:
2Add Internet access rules for employees
Add internet access permission rules for other employees. The following example shows how to add a work time rule:
Add access rules for employees to send and receive emails, log on to QQ, and non-work hours in sequence. After the settings are complete, the general rules are as follows:
After setting all the rules, clickEnable Internet access control, default filtering rule selectionAll data packets that comply with the configured internet access control rules can pass this route, ClickSave.
Note:The default rule selected here is filled in according to actual requirements. "allow" means that the set rule is whitelist, and "deny" means that the set rule is blacklisted.
So far, the Internet access control function has been set up. All computers in the office network will use the Internet according to the configured rules.
