How to set up dial-up Internet for Tengda (Tenda) router

Telephone Line Access users (please prepare 2 short cable)

To pick up the line (the smaller one) of the phone lines (the finer lines), cat out of a network cable to connect the router's WAN port (blue), and then find a short network cable, one to connect the computer, a router 1/2/3/4 any interface (yellow), wiring mode as shown below:

Note: The normal functioning of the router is the LED sys Blink, the WAN port is often bright or blinking, and the port that is connected to the computer in the 1/2/3/4 mouth is often lit or blinking.

Network cable users directly into the household (please prepare 2 short cable)

Directly to the household network cable connected to the router's WAN port (blue), and then find a short network cable, a computer, a router 1/2/3/4 arbitrary interface (yellow), wiring mode as shown below:

Note: The normal functioning of the router is the LED sys Blink, the WAN port is often bright or blinking, and the port that is connected to the computer in the 1/2/3/4 mouth is often lit or blinking.

Computer IP Configuration

Set the local connection IP address on the computer to "automatically obtain IP address" (for example, WIN7 system)

Click on the "Network icon" in the lower right corner of the desktop to open "Network and Sharing Center";

Click "Change adapter Settings"

Right-click "Local Area Connection" to select "Properties"

Double-click Internet Protocol version 4 (TCP/IP)

Select "Automatically obtain IP address", "Automatically obtain DNS server address", click "OK";

Click "OK" again, set to complete;

Set up a router to surf the internet

Enter in the browser: 192.168.0.1 press ENTER, enter the password in the Jump page admin click "OK"

Select "ADSL dial" in the page, enter the broadband account number and password, "OK", refer to the following setup steps:

Try whether you can surf the internet

If the WAN port status shows "Connected", you can browse the Web and surf the Internet

Attention matters

After normal access through the router, do not need to click on the "Broadband Connection", the computer boot can be directly connected to the Internet;

If there are other computers need to surf the Internet, direct the computer to the router 1234 arbitrary free interface, refer to the second step will be local connection to automatically obtain IP can, do not need to configure the router.