How to set up the use method for wireless router

First, wireless router basic use method

Take the hand of the wireless router, connect the power supply (embarrassing ...) Nonsense, haha)

The wireless router generally has 5 cable jacks on the back, one of which will be different from the other four. As shown in figure

Separate this color the different jacks are connected to the ADSL cat, so this place should be connected with your cat with a network cable.

The other 4 holes are used to connect to the desktop, and of course you can use it to connect to your notebook.

The wiring setup is complete!

Two, wireless router software setup method

To make your wireless router work, you need to set up your router with software, tell your router your ADSL username and password, and how to encrypt your wireless network.

With a network cable, connect the notebook to the router (four holes in the picture), and then you can set the wireless route through the browser.

The router address is: http://192.168.1.1, direct input access can be (see: Each brand Router address encyclopedia).

Successful access, the browser will prompt you to enter the login username and password, the vast majority of the router username is admin, password is also admin (see: router password Daquan All brand routing password summary).

After landing, you should first set ADSL virtual dial (PPPoE), enter your ADSL username password, so that the router can automatically dial the Internet.

Another: If you are to put this no line by connected with another line, then you can skip the ADSL setup step, set up the wireless network directly.

Find "Quick Settings" and set ADSL.

Because of different brand routers, set the interface is different, so here only to ipcom wireless router For example, the other brand router setup process is basically similar, in short, you find the place to set ADSL.

Select ADSL virtual dialing and next in the Quick Settings menu

Fill in your Internet account and password

Fill in the successful "save" can be.

Third, wireless network security Configuration

To make sure your wireless network is not being used by others, you need to set up a secure password for your wireless networks.

First find "Wireless Settings"-"Basic settings", in the "SSID" to fill in the name of your router, your own casually set up to identify your network.

Into the "Security settings," which is mainly used to set up wireless access password, the router brand is different, but the content of the set is basically consistent, reference to the following figure.

Set the three items above, and then "save" (remember the password OH)

The wireless router section is basically set up, and finally the wireless network to open the laptop connection, and then search to the wireless network you just set up, and finally click on the connection, enter your own just set the password.

Hey, everything's OK.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join