How to solve the 192.168.1.1 router is not open

to solve the 192.168.1.1 of the general router is not open the way

Method One: Set up a network connection

Here is an example of a Windows XP system, which is how Windows 7 and Windows 8 systems are set up.

1, right click on "Network Neighborhood"--> Click "Properties"

2, right click "Local Connection"--> Click "Properties"

3, select "Internet Protocol (TCP/IP)"-> Click "Properties" or double-click

3, select "Automatically obtain IP address" and "Automatically obtain DNS server address"--> click "OK".

Method Two: Install Tp-link wireless router correctly

1, telephone line Internet: Please prepare 2 short network cable, a network cable used to connect ADSL Modem (cat) and Tp-link wireless Router WAN interface; Another network cable is used to connect any LAN (1/2/3/4) interface and computer on the Tp-link router.

2, Optical brazing: Please prepare 2 network cable, a network cable used to connect the light cat and Tp-link Router WAN interface; Another network cable is used to connect any LAN (1/2/3/4) interface and computer on the Tp-link router.

3, network cable households: Please prepare 1 network cable, first the broadband operator provided by the household network cable inserted in the WAN interface of the Tp-link router, and then the network of their own to connect the computer, the other end connected to the Tp-link router on any one LAN (1/2/3/4) interface.

Method Three: Replace the browser

Please switch to a browser and enter 192.168.1.1 in the browser's address bar to see if you can turn it on.

Method Four: Replace the network cable

Please switch to a network cable, connect the computer with the Tp-link router's LAN (1, 2, 3, 4) interface with a new network cable, and then test whether you can open the 192.168.1.1 login page of the Tp-link router in the browser.

Method Five: Reset the router

If you use the previous 4 methods, you will not be able to open the Tp-link wireless router's 192.168.1.1 login page, then you can restore the Tp-link wireless router to the factory settings (reset).

Reset method: In the Tp-link router plug in power, and then long by the router interface reset small hole (button) about 10 seconds, you can restore factory settings (reset).

Method VI: Setting up a browser

If you open a browser pop-up dial-up connection, click "Settings"-select "Never dial Connection"-"OK" and then log back in. If you do not eject the dial-up connection when you open IE Explorer, you can ignore this step.

Method Seven: Work offline

If the browser pops out of work offline, open the browser to select File-Cancel work offline before the tick. If you are not working offline when you open IE Explorer, you can ignore this step.

Pay attention to the problem

If you follow several methods of appeal to set up, you can not open the Tp-link wireless router 192.168.1.1 settings URL, most of your Tp-link wireless router has failed, please switch to a wireless router!!!.

Warm tips

Users using broadband connection dial-up Internet access, must disconnect the broadband connection before setting up the router, make sure that the computer is connected with a short cable to the router's 1/2/3/4 any interface, and then open IE browser in the case of no networking to enter 192.168.1.1.

That is, when the router is set up, do not need to network, is disconnected from the network settings; many people have always thought that setting up a wireless router when you need to be able to set up the Internet, this is completely wrong.