How to solve the picture and the sound is not synchronized

In the Audio Switcher window, select the Enable built-in audio switch filter and sound delay time (milliseconds) option, and then calculate the time value based on the time difference between the steps and enter into the box, negative for sound playback, positive value for the sound in advance. Finally, click the "Apply" button. So the sound will be played ahead or late.

Second:

The top-left corner of the player, and the number seems to be the resolution,--about 5 rows of numbers, always changing. It's a storm. A set of audio and video that appears to be synchronizing the progress bar. Can be added or canceled in the settings.

The color is a little green, all the movies are like this? If this is the case, it is likely that the quality of the film is not the reason.

The movie picture card is very, but the sound is fluent, sets up plays the playback frame number.

The player puts the movie sound and the picture is not synchronized, the coding conversion process rate cannot keep up. Also in the MPC settings inside.

MPC comprehensive settings inside as if there is a comprehensive set, in the inside to operate, do not want to trouble, the MPC cover installation, the installation of other plug-ins to screen the line.

Third:

Media Player Classic Select-filters-audio switcher-tick Audio time shift to fill in the appropriate number of milliseconds.

Toggle left and right channels

When we play some VCD, we often encounter the situation of bilingual video. To have only one sound channel, you will usually click the "view → options → playback" option. Move the slider in the Equalization option to one side of the channel so that you can block the sound of another channel, but it's not perfect because there's only one speaker at this point, so it must be uncomfortable to see the movie.

What if you can make two channels simultaneously with a sound? You can use the following method to solve the problem. Click the "view → options → audio switch" option to select the "Enable built-in audio switch filter" and "Enable custom Channel mapping" checkbox, set the speaker configuration box to 2 input channels, and then according to the sound channel, the front left and right options are all checked to the same channel, and finally click "Apply" button, the left and right speakers will also emit a sound channel.

Increase volume and sound quality

When playing video with the storm, if you encounter a small sound and stifleness, even if the volume on the panel to the maximum can not improve the volume, we may use the following methods to solve.

Open the Audio Switcher window in the previous method, selecting the Enable built-in audio switch filter and the Enable Custom Channel mapping checkbox, select the speaker configuration as 2 input channels, and then in the box below, click "Apply" by selecting all the 1 and 2 channels in the "left" to "top right" boxes. button, you will find that the volume is significantly increased, and the sound quality becomes crisp and rich in three-dimensional sense. It's a good idea to use this method to raise the volume, and after the movie is finished, it's best to restore the original settings. Because some movies may have conflicts with such settings when playing, causing them to not play properly.