HP Industrial Computer G9 installation system should be noted

HP Industrial Computer G9 installation system need: Simple nagging a few words

1. F10 configuration, select Settings icon-Select Storage icon-Select the array card icon-make riad according to the Middle box prompt (required)

2. Load Driver

Drive directly to the root of the USB stick, select F11 Select Startup Item, in the installation interface Press E, go to the edit page after the Linuxefi line to add the following parameters: Modprobe.blacklist=ahci inst.dd

3, insert the USB flash drive, according to the prompt to choose R Refresh, and then according to the serial number, select USB Drive-continue to select the drive, select C, and then press C to load

4, skip% ratio on the quick unplug the U disk, the normal installation system.

HP Industrial Computer G9 installation system should be noted