Huawei Wireless Ac,ac Case

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/6B/FD/wKiom1U8qy7CAXQcAACw0bGc67k009.jpg "title=" 2.jpg " alt= "Wkiom1u8qy7caxqcaacw0bgc67k009.jpg"/>

Basic configuration of the router

[Huawei]interface gigabitethernet 0/0/2

[Huawei-gigabitethernet0/0/2]ip Address 11.0.0.1 30

[Huawei]int LoopBack 1

[Huawei-loopback1]ip Add 1.1.1.1 30

Configuration of AC

Plan Vlan:vlan 102 for uplink and router interface VLAN, vlan100 for AC management VLAN, vlan101 for APS to distribute service VLAN.

[Ac6605]vlan Batch 100 101 102

[AC6605]dhcp enable

[AC6605]int VLAN

[Ac6605-vlanif100]ip Address 192.168.100.1 24

[Ac6605-vlanif100]dhcp Select interface

[Ac6605]int VLAN 101

[Ac6605-vlanif101]ip Add 192.168.101.1 24

[Ac6605-vlanif101]dhcp Select interface

[AC6605-VLANIF101]DHCP Server Dns-list 8.8.8.8

[Ac6605]int VLAN 102

[Ac6605-vlanif102]ip Address 11.0.0.2 30

[Ac6605]ip Route 0.0.0.0 0 11.0.0.1

[Ac6605-gigabitethernet0/0/2]port hybrid Pvid VLAN 102

[Ac6605-gigabitethernet0/0/2]port hybrid untagged VLAN 102

Configuring WLAN Features for AC

[Ac6605]wlan Ac-global carrier ID cmcc AC ID 1 AC ID 1, Carrier for CMCC

[Ac6605]wlan

[Ac6605-wlan-view]ac sysnetid AC01 Network element name is AC01

[Ac6605-wlan-view]wlan AC source Interface VLAN 100 with management vlan100

Por tunnels the following APS

[Ac6605]interface gigabitethernet 0/0/1

[Ac6605-gigabitethernet0/0/1]port Link-type Trunk

[Ac6605-gigabitethernet0/0/1]port trunk pvid VLAN 100

[Ac6605-gigabitethernet0/0/1]port trunk allow-pass VLAN 100 101

Configuring the AP on-line

[Ac6605]wlan

[Ac6605-wlan-view]ap-auth-mode Mac-auth with AP's Mac authentication

[ac6605-wlan-view]ap ID 1 Type-id mac 00e0-fc7a-39a0 Enter the MAC address of the AP

Configuration area

[ac6605-wlan-view]ap-region ID 1 has a fairly established area number of 1, or can be arbitrarily defined

[ac6605-wlan-ap-r]ap ID 1 joins the first AP

[Ac6605-wlan-ap-1]region-id 1 Implementation Join Region 1

Configuring the WMM Template

[ac6605-wlan-view]wmm-profile ID 1 name WMM configuration wmm template name for WMM

[ac6605-wlan-view]radio-profile ID 1 name Radio configuration RF template name is Radio

[ac6605-wlan-view]security-profile ID 1 Name SECU configuration security template name is Secu

security-policy WEP

                              authen     WEP Tication-method Share-key           password reduction in the security template, this is optional.

WEP key wep-40 pass-phrase 0 cipher xxxxx

[ac6605-wlan-view]traffic-profile ID 1 Name Tarff configuration traffic template name Tarff

[ac6605-wlan-view]radio-profile ID 1 enters RF template

[ac6605-wlan-radio-prof-radio]wmm-profile ID 1

Create a Service Set

[Ac6605]int wlan-ess 1

[Ac6605-wlan-ess1]port hybrid Pvid VLAN 101

[Ac6605-wlan-ess1]port hybrid untagged VLAN 101

[Ac6605]wlan

[ac6605-wlan-view]service-set ID 1 Name S01

[Ac6605-wlan-service-set-s01]wlan-ess 1

[ac6605-wlan-service-set-s01]traffic-profile ID 1

[ac6605-wlan-service-set-s01]security-profile ID 1

[Ac6605-wlan-service-set-s01]ssid Huawei

[Ac6605-wlan-service-set-s01]service-vlan 101

Establish Virtual APS

[AC6605-WLAN-VIEW]AP 1 Radio 0 Radio 0 means the operating frequency 2.4GH if the Radio 1 operating frequency is 5GH

[ac6605-wlan-radio-1/0]radio-profile ID 1 Service Set push to AP

[ac6605-wlan-radio-1/0]service-set ID 1 Binding RF Template

[Ac6605-wlan-view]commit AP 1 is sent to AP1, this command is essential

Optional: Configure the same network segment, no visits to ping

[ac6605-wlan-view]service-set ID 1 1 Indicates the number of an AP.

[Ac6605-wlan-service-set-s01]user-isolate refused to exchange visits

[Ac6605-wlan-view]commit AP 1 finally remember to apply to the AP to take effect.

This article is from "Dream Star" blog, please be sure to keep this source http://wcrichard.blog.51cto.com/5081959/1638665

Huawei Wireless Ac,ac Case