If one wayos account is used for multiple dialing (one-way multiple dialing) testing software, different test results may exist in different regions.

Principle:
Simultaneous dialing is achieved by sending dialing commands to each Wan port at the same time. Disconnect before dialing to ensure the connection is successful. If you are free of charge, you may need to dial at the same time.

Usage:
1. Connect Telecom lines to a vswitch (or use VLAN configuration to save the cost of a vswitch. VLAN configuration is performed on wayos to allow multiple WAN ports to share one physical port, if no VLAN is configured, you can use a common switch), connect to two different WAN ports, start the software, and fill in the routing information.
2. Select the WAN port to be processed (based on the user name you entered), and then select disconnect. Wait for all lines to receive the disconnect command. Wait a moment.

3. Click, select dialing, and view it in wayos status overview.

I am only guessing about the software principle. I didn't test the software (the TT test was successful, but wayos was slow in dialing, so I don't know it). The test results can be fed back to middleware ﹏. yunyun qq561454825

You may not be able to allocate more resources in some regions. Please contact me for help remotely.

Software shelling, spam 360 may report viruses, please feel free to use

If software is required, you can add a group. In group sharing, there are