Illustrator design Vector style fashion illustration rendering tutorial

Source: Internet
Author: User
Tags extend prepare
I will give you a detailed analysis of the Illustrator software and share with you the tutorial on designing the Vector style fashion illustration.
Tutorial sharing:
1. Select software and prepare sketch
Because the style of the illustration drawn this time is relatively simple, most of them are the color of a large area, and the image edge is clear, we decided to use vector software. Here I chose Illustrator 10 (AI for short). The reason is: preemptible, similar to Photoshop (PS for short), and good compatibility between MAC and PC platforms, version 10 provides complete functions.
You can sketch the paper and understand it yourself. You do not need to draw lines carefully. The scanned image can be used in Photoshop to adjust the definition slightly.

 

Hand-drawn sketch
II. Subject profiling
<The most important thing about a person's face is his face. Therefore, you must make adjustments first to keep the most fresh feelings in this wonderful part. To avoid a serious imbalance in the face proportion of the drawn characters, we can refer to the actual side image structure in the photo to describe the "real" and then perform art processing that suits the illustration style.

 

 

 

 

 

# FormatImgID_5 #
Subject profiling
3. Clothing
From the global perspective, the subject is too monotonous, so it is decided to add a pattern on the character shirt for decoration, which is also to enrich the layer of the subject. All the ornaments rely on hand-painted, where you can use the mouse tablet, but the lines drawn by the mouse will look dull and lack of changes.
IV. Line adjustment
No unnecessary sharp corners can appear in a line. It would be too bad if these sharp corners appear on the face of a person. On the other hand, the lines should be very tough, especially curves, and should be as flexible as steel wires, rather than as weak as wire and cotton wires. The lines should make people feel pressed to play quickly.
5. Background preparation
The next step is to draw the background and its decoration. Because the background is a European style castle, we selected a real-time photo, then, we use an AI rectangular tool, a circular tool, a polygon tool, and a free deformation tool to sketch the outer contour.

 

 

Background preparation
6. Combination, composition, and color of elements
At the beginning of drawing on paper, we had a rough picture, but now many elements have changed, so we have to change the original idea.
In addition, we have always painted all the elements in the screen with black, white, and gray. Now it's time to color the screen. We decided to set the image as a riverside view at dusk, so we chose the following colors to color the image.

 

Element combination, composition, and color
7. Decoration and adjustment
In order to enrich the screen and add layers, we decided to add some small decorations, such as ripple, dotted circle, and background decoration. We can also adjust the chart with the outer border to get the most perfect picture.

 

This completes our work! How are you satisfied with your masterpiece? It doesn't matter. You can draw a better picture if you practice more. It's never a waste of time to make a qualitative change. As long as you have patience, you will succeed. The feeling of art is immutable, and the law is not static. I want to use these general rules flexibly. The Ancients said: it is better to believe in books than to have no books, therefore, it is better to study in an integrated manner.

 

Decoration and adjustment
Finally, we will provide examples of this tutorial and other necessary materials. I hope it will help you better learn Illustrator and Illustration painting.
1. Select software and prepare sketch
Now, let's start by selecting software.
Because the style of the illustration drawn this time is relatively simple, most of them are the color of a large area, and the image edge is clear, we decided to use vector software. Here I chose Illustrator 10 (AI for short). The reason is: preemptible, similar to Photoshop (PS for short), and good compatibility between MAC and PC platforms, version 10 provides complete functions.
Next, prepare the sketch.
Appliance: Pencil, rubber, white paper, and inspiration
Process: draw a picture based on your ideas ==> finish the work on paper ==> scan
You can sketch the paper and understand it yourself. You do not need to draw lines carefully. After scanning, you can adjust the definition of the scanned image in PS to reserve it.

 

Prepare sketch
The original intention of drawing this illustration was to read the Austrian illustrator Anja Kroencke's website, which was created by imitating Anja Kroencke's painting style.

 

Anja Kroencke was born in Vienna, Austria in 1968 and is now an influential female illustrator. She graduated from the Vienna Institute of Fashion and Design, majoring in fashion design and illustration.
II. Subject profiling
Enter AI, create a File, and select File/New to perform the following settings:
Size: A4; Units: Millimeter; Orientation:

 

; Color Mode: CMYK Color. Press OK to confirm;
Select View/Hide Page Tiling to Hide the print line (that is, dotted box );
Place the scanned sketch in File/Place and press Ctrl + 2 on the keyboard to lock the object.
The next step is to use the pencil tool.

 

It is no problem whether you use a tablet or a mouse to draw the outline of the subject, because it is just a rough outline, and it is important to adjust it later.

 

 

Subject profiling
The most important thing about a person is his face. Therefore, you must make adjustments first to keep the most fresh feeling in this most exciting part. The picture on the right above is a photo of a real girl's side silhouette. We can see that she is not aesthetic, so it is necessary to make appropriate artistic processing for this "real" image for illustration purposes.
Use the following tools to adjust the Sketch line:

 

Independent object selection tool: used to adjust a single Beiser curve anchor and anchor.

 

Add anchor tool: used to add an anchor to a curve.

 

Delete anchor tool: used to remove redundant, repeated curve anchor points. Actually, you use a pen tool.

 

When it is close to a curve or anchor, it will automatically become the above two tools.

 

Conversion anchor tool: used to convert between the sharp corner and the rounded corner.

 

Every tool with a black triangle in the bottom right corner

 

You can click (hold down the black triangle without releasing it) to bring up a series of implicit tools.

 

Next, we can adjust the face of a person. To avoid a serious imbalance in the face proportion of the person after the painting, we can refer to the actual side image structure of the person in the photo. The following are some references:
Face proportion

 

Face proportion
The facial proportion of a person is basically as shown in the figure. The central axis of the eye (the position of the eye eyelashes in this figure) is about 1/2 of the height of the person's head (from the top to the lower jaw, the bottom line of the nose is 1/2 of the eye to the lower jaw, that is, 1/4 of the whole head height.
# FormatImgID_22 #
Face proportion
In addition, the length-width ratio of the head is basically. In particular, the silhouette of the female's head in this illustration can almost extend the outer contour to draw a square. After mastering the above representative proportions, the following graphic adjustment stages will be much easier, and the final products will be more satisfactory. After the head is painted, you can also perform art processing.
# FormatImgID_23 #
The main aspects of art processing are as follows:
Forehead: a little drum, this can appear smart, clever. (Note the protruding points at the hair edges)
Eyelashes: they must be highlighted, exaggerated, and tilted. This shows the special charm of girls.
Nose: tip, pick on the tip of the nose, tall and straight. Or a little collapsed, there is a round and small nose at the tip of the nose. It depends on the personal aesthetic and the age of the painted characters.
Upper Lip: slightly up, looks pretty, cute.
The facial image is as follows:
# FormatImgID_24 #

 

# FormatImgID_26 #

 

 

The facial image after completion is as follows:
3. Clothing
Follow the steps above to complete the shirt and arms of the subject. Pay attention to the proportion of the human body, which can be exaggerated in some places, for example, the stretched body and arms, which can make the characters look light, also in line with Anja Kroencke similar fashion illustration style. The drawn image is shown in the following figure:

 

Clothing
Before we finally determine the color, all elements in the screen are temporarily colored with black, white, and gray.
Now we can see that, from the global perspective, the subject is too monotonous, so we decided to add a pattern on the character shirt for decoration, which is also to enrich the layer of the subject.
Select a brush tool

 

Double-click the paint brush tool in the toolbar and set it in the pop-up dialog box as follows:

 

Set
Configure the following settings in the Stroke panel:

 

Configure the following settings in the Stroke panel:
Select a brush from the Brushes panel and double-click the brush as follows:

 

Double-click the brush settings
The purpose of this setting is to achieve an uneven brush effect, so as to achieve a change in a relatively neat line. The following is a comparison between the effect of setting and not setting: (the picture on the left shows that the picture on the right is not set)

 

 

The left is set, and the right is not set.

 

All the ornaments rely on hand-painted, where you can use the mouse tablet, but the lines drawn by the mouse are slightly straight, lack of changes. (My graphics are drawn on a tablet)
The figure shows the person who added the decoration:

 

Added the main character of clothing accessories
Here, we should pay special attention to the black and white layers to lay a good foundation for future coloring, as the teacher often said in the art school: a good water powder (color painting) it should also be a good sketch (black and white ).
IV. Line adjustment
The above steps all talked about how to adjust the lines, but how can we adjust the lines to conform to the basic artistic rules?
First of all, there should be no unnecessary sharp corners in the line. It would be too bad if these sharp corners appear on the face of the character. The following figure is an example. The picture on the left is a very round line, and the picture on the right is sharp.

 

 

Line adjustment
How to avoid the appearance of sharp lines?
First, select

 

 

.
2. Keep the two adjusting handles of one anchor in a straight line.
On the other hand, the lines should be very tough, especially curves, and should be as flexible as steel wires, rather than as weak as wire and cotton wires. The lines should make people feel pressed to play quickly. (Except for special trembling lines, such as clothing)
The following figure shows clearly that the left side is dragged, and the right side is much harder.

 

 

The left side is dragged, and the right side is much harder.
This phenomenon is often caused by the fact that there are too many anches and the adjustment handles between the anchor cannot correspond to each other.

 

Solution: delete unnecessary nodes, adjust the anchor angle of the anchor, and use the line leveling tool to smooth the lines. These problems require a lot of patience, because the line drawn by hand is common. Here you are responsible for your work and art. Work may be trivial, but earnest and steadfast work attitude is always the best way to achieve artistic purposes.

 

Several layers can be created during the painting process to facilitate the choice of plotting. Select all content on a layer. You can click the circle next to the layer on the Layers panel to select all content. (After clicking, the circle turns into a double circle.) even if you only create one layer, it doesn't matter. If you need to adjust the order of objects in the same layer, you only need to remember the following shortcut keys:
Ctrl + [after setting (repeatedly moving objects backward in order)
Ctrl +] forward (repeatedly forward objects in order)
Ctrl + shift + [set to the beginning
Ctrl + shift +] to the end
5. Background preparation
The next step is to draw the background and its decoration. Because the background is a European style castle, we selected a real-time photo to sketch the outer contour.

 

Background preparation
The tool we need is simple: rectangle tool

 

; Circular tool

 

; Polygon tool

 

; Free deformation tool

 

First, put the selected real-time photo in File/Place and press Ctrl + 2 on the keyboard to lock the object. We will make a geometric combination of the entire graph.
Select the polygon tool to depict the roof, define the triangle first, and click the screen dialog box with the polygon tool. The settings in the red box are as follows:

 

The key is the settings in the red box.
Hold down the Shift key and drag a positive triangle, use the free deformation tool to change the triangle to a thin shape, and hold down the Alt key to drag the free deformation box from the left to the middle.
The rectangle tool is used to describe the regular part. You can drag the square by holding down the Shift key.
The circular tool is the same as the rectangular tool. You can hold down the Shift key and drag it to obtain the positive circle.
The following describes how to use a rectangle tool to draw a trapezoid. First, draw a rectangle. Use a free deformation tool to hold down and hold down the deformation box in the top right corner, and press Ctrl + Alt + Shift, the mouse changes to the gray arrow and starts to drag to the center.

 

Note that, after the hold is completed, first release the mouse and then stop pressing the combination key. The order must not be reversed. Otherwise, the rectangle is reduced without any change in shape.

 

 

No changes in shape
Some rectangles need to be changed after painting. You can add an anchor to achieve this effect. The procedure is as follows:

 

 

 

Some rectangles need to be changed after drawing.
The following figure depicts each roof and each wall in sequence:

 

Depicts every roof, every wall, and the image after painting is like this.

 

Note that in the process of drawing, we do not completely describe the image based on the actual image. We have to choose between the image and the aesthetic. Ignore unnecessary details or even remove the secondary aspects that affect the appearance of your eyes.
6. Combination, composition, and color of elements
When all the main elements are completed, the question of how to combine them is left.
About the diagram:
At the beginning of drawing on paper, we had a rough picture, but now many elements have changed, so we have to change the original idea.
Here we still maintain the traditional triangular diagram, which is visually stable. Pay attention to the red lines in the picture below, which is our basic line of diagram. We added a Sun to the image to make the image more complete.

 

Element combination, composition, and color
About colors:
We have always painted all the elements in the screen with black and white, and now it is time to color the screen. We decided to set the image as a riverside view at dusk, so we chose the following colors to color the image.

 

About colors
These colors are similar colors (or near colors), which are weak in comparison and have small fluctuations. They are basically progressive and suitable for such a warm and calm subject.
The colored image is shown in the figure below: (note that the character's coat has no outer border, because the background color is adequate, so that the coat can be clearly displayed when the border is dropped, this benefits from observing and adjusting images from time to time and abandoning the serious attitude of unnecessary elements)

 

Colored image
7. Decoration and adjustment
To enrich the image and increase the layers, we decided to add some small decorations.
Ripple drawing:
First draw a straight line, select this line, apply Filter/Distort/Zig Zag... in the dialog box, make the following settings: Select Absolute and Smooth, select Preview, and adjust the two slide bars to make the straight lines wave.
Then, drag the line segment downward without holding down the Alt key, and the mouse pointer changes

 

To the appropriate position, open the mouse first, then release the Alt key, so that the same wave line is copied. (When dragging, press the Shift key to extend the absolute vertical angle of the mouse) then press Ctrl + D several times to repeat the above process to make a line of the same wave line. In the Stroke panel, set the line to 0.5pt.
Dotted circle:
In fact, this is the simplest, but every dotted line in the circle remains basically a dot, you need to set it specially. For specific parameters, refer to the values in the red box below:

 

Dotted circle
The following background decoration:
You can make it by yourself based on what you learned. Here, we only talk about two points: the outer frame is two concentric circles, which are also broken by the Filter/Distort/Zig Zag. The middle end is a large and small elliptic, which is similar to the creation of trapezoid. The order is placed by 1.1 points.

 

The undermost background decoration
Outer border:
Draw a rectangle that is large enough (that is, the size of the area you have drawn) on the top and draw a rectangle larger than him. Select both of them, and align them by pressing the two buttons in the red selection area below (click any rectangle after selection. When alignment is applied, it will take him as a reference and align with him .)

 

Outer border
Then press the two buttons (Expand is the confirmation button, and then press) to empty the large rectangle. In this way, we can use this context box to select a picture to block useless parts.

 

Expand is the confirmation button, and then press
Finally, we use the following two buttons to combine some images that can be merged. For example, Castle, human arm and hand, head and neck.

 

Finally, we use the following two buttons.

 

Now, our work is complete! How are you satisfied with your masterpiece? It doesn't matter. You can draw a better picture if you practice more. It's never a waste of time to make a qualitative change. As long as you have patience, you will succeed. The feeling of art is immutable, and the law is not static. I want to use these general rules flexibly. The Ancients said: it is better to believe in books than to have no books, therefore, it is better to study in an integrated manner.

 

All right, the above information is all the content that is shared by the detailed design tutorial of Vector style fashion illustration for the users of this software of Illustrator, as you can see here, I believe that you are very clear about the drawing method. Then, let's draw a Vector style fashion illustration by following the tips shared by Xiaobian.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.