In XP, you do not need to install software or hardware to connect two or more computers to the Internet.

Preface:There are two computers on hand, both of which have wifi wireless NICs. at ordinary times, the company accesses the Internet through the company's Wi-Fi wireless router. Yesterday, a WCDMA 3G wireless Internet access was activated,

As long as the base stations of China Unicom can access the Internet at any time and anywhere, the speed is faster than the bandwidth in the home. The theoretical peak value can reach 14.4 Mbps, and the standard is 7.2 Mbps,

In theory, the bandwidth is several times faster than 2 m in the home market. During the fast wireless Internet access that 3G has brought to us, I suddenly thought about whether my computer can be used as a host to let all

Connect all computers with WiFi to my computer and access the Internet through WCDMA 3G ?? If you use my own WCDMA 3G Internet connection without installing other software and hardware

In the future, if all my colleagues in the company can go to the WCDMA 3G together through my computer when they are engaged in activities on the mountains or on the beach, isn't it a very exciting thing?

Preparations:My practice has proved that we can connect all computers with WiFi wireless network cards to my computer together with WCDMA 3G, as long as your computer is no more than 100 meters away from me

We don't need to install any software or any hardware between them. All the machines I tested were Windows XP.

Procedure:

The computer directly connected to the WCDMA 3G wireless network adapter is the host. The steps are as follows:

1. Enable the properties of the WCDMA 3G wireless network card. In the advanced options, enable other network users to connect to the computer over the Internet.

Then, select "wireless network connection (Wi-Fi wireless network)" in the home network connection, and press OK for all prompts. Then the system sets your Wi-Fi network card

The default IP address of 192.168.0.1.

2. Enable the properties of the WiFi wireless network adapter (Network Neighbor-> Properties), wireless network configuration-> advanced, select only computer to computer (specific), and then return to add available network,

Network Name (SSID) (n): WCDMA network identity authentication: Open Data Encryption: Disabled (you can select WEP and enter the desired key, so the network is safer ).

Are you sure you want to exit.

Now that the host settings are complete, the following are the settings for all client machines:

1. Enable the properties of the WiFi wireless network adapter (Network Neighbor-> Properties), wireless network configuration-> advanced, select only computer to computer (specific), and then return to add available network,

Network Name (SSID) (n): WCDMA network identity authentication: Open Data Encryption: Disabled (you can select WEP and enter the desired key, so the network is safer ).

Are you sure you want to exit.

2. Enable the properties of the WiFi wireless network adapter (Network Neighbor-> Properties), General-> Internet Protocol (TCP/IP)-> properties,

The specified IP address is 192.168.0.2 (the next one is 192.168.0.3, and so on), and The subnet mask is 255.255.255.0.

Default Gateway: the IP address of the DNS server 192.168.0.1 must be the same as that of the host. You can view the IP address through ipconfig/all when the host is connected to WCDMA.

Now, both the host and the client will see an extra WCDMA connection in the available wireless network, and the host and the customer can access each other as long as the host is connected

WCDMA 3G and connected to the Internet. All clients can also be connected to the Internet. Haha, it's really fun.

Please note: This post is from www.vcfans.cn/bbs