Incorrect display solution when switching between windows and linux

When switching between windows and linux, the display shows an incorrect solution-Linux general technology-Linux technology and application information. The following is a detailed description. Because it is a dual-system, when switching between Windows and linux, the display position is incorrect and is adjusted every time, the resolution or refresh rate of the display can be adjusted, so the resolution is adjusted first. When the update rate is changed from 85 to 75, the display position is correct, but I am unwilling to do so. It may be that the 75 setting is different from the 85 setting, So I:

Gtf 1024 768 75

It is concluded that:
#1024x768 @ 75.00Hz (GTF) hsync: 60.15 kHz; pclk: 81.80 MHz
Modeline "1024x768_75.00" 81.80 1024 1080 1192 1360 768 769-HSync + Vsync

Again:
Gtf 1024 768 85

It is concluded that:
#1024x768 @ 85.00Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769-HSync + Vsync

Because the vertical position is correct at 85, that is, the horizontal position is incorrect, the two are combined:

#1024x768 @ 85.00Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
Modeline "1024x768_85.00" 94.39 1024 1080 1192 1360 768 769-HSync + Vsync

When adding the Monitor segment of the/etc/X11/xorg. conf file, restart X to solve the problem.