Introduction of Win7 Province electric skill

1. Energy consumption of idle resources

When a computer is started, it will not always be in full load running state, so there will be a lot of free time, so the power consumption in the idle time becomes an important technology. In Windows7, idle power consumption is effectively improved, when a certain hardware time does not work will enter the Low-power state has reached the purpose of saving electricity. This technology is included in the CPU, hard disk, memory, and network sections. For example, a full power run power consumption of 35w CPU in idle power consumption of almost 0, only this one can save a lot of electricity.

　2. Start the service by triggering

Typically, system services are started together when the system is started, and then reside in the background to wait for calls. In Windows7, some system services are started only after some events have been triggered, such as inserting a device or changing IP. This can reduce the number of long-running services in the background process.

　3. Enhanced Processor power Management

Windows7 integrates the latest power management technology, which enables WINDOWS7 to dynamically adjust CPU performance according to current load conditions and performance requirements.

　4. Adaptive Display Brightness adjustment

Microsoft says it usually shuts down automatically for 10-15 minutes without any action. But in actual use there will be more short time operation, in order to better save energy, the technology will reduce the brightness of the display. In addition, it can use a number of sensor devices, depending on the ambient brightness to adjust the display brightness.

　　5. Low Power Audio

WINDOWS7 will support Intel's Low-power HD Audio specification, which allows the codec to enter a very low power state. Windows7 also supports selective suspend technology, which shuts down devices that are idle, such as USB devices such as microphones and cameras.

　　6. Timer Integration

At present, the processor uses the gap free time of processing instruction to achieve energy-saving purpose, but most energy-saving technologies require a certain length of idle time to obtain energy-saving effect. This technology increases the processor's idle time by letting the Windows kernel terminate at the same time and focus on the more dispersed timers over a short period of time.

In addition, when a laptop is using a battery, Windows7 reduces the activity frequency of non-critical background programs.

　　7. Bluetooth Equipment Power Improvement

When Windows7 detects that a Bluetooth device is in a low-power state, it temporarily shuts them down, i.e. "selective suspend."

　8. Network Equipment Power Improvement

The compatibility of the low power mode of the wireless network controller in Windows7 is enhanced and is enabled only if the wireless AP device supports low power mode. Vista can cause a sudden disruption to wireless network connectivity because it does not detect whether it supports low power mode in advance. Windows7 prevents this from happening and detects whether the wireless AP supports this mode before entering low power mode.

　　9. Optimization scheme for typical applications

In addition to the improvements listed above, Microsoft has turned its sights on specific applications, including search, browsing without networking and games. Here are some of the optimization scenarios for DVD playback:

Keep the CPU low power mode without impacting playback performance

Improve the power consumption of the Desktop Window manager and GPU by changing the architecture

Intelligent data caching can reduce the speed of optical drive

This is the Windows7 9 important improvements in power management, which can save more power than the previous system. In addition to these improvements, IT professionals can also use power management diagnostics to look for problems that may affect power efficiency.