Introduction to computer access through cmwap of mobile phone GPRS function

Introduction to computer access through cmwap of mobile phone GPRS function

Mobile phone (Nokia N70)
1. Install a data cable driver on your computerProgram(Go to the Nokia official website to download the DKU-2 driver ).
2. Connect the N70 with the computer through the DKU-2 data cable.
3. Find the "Network and dial-up connection" program group in the control panel and open it.
4. Select "New Connection". In the displayed Network Connection Wizard, click Next.
5. Select the first "Dial-to-dedicated network" option in the connection network type and click Next.
6. Select the modem-Nokia N70 USB (com4) from the network connection device )".
7. Enter "* 99 #" in the dialing phone settings and click Next.
8. In the smart card settings, select "do not use my smart card ".
9. Select "all users use this connection" in connection and click "Next.
10. Enter the new connection name to complete the dialing connection establishment process.
11. Double-click the new dial-up connection to bring up the dial-up interface.
12. Click "dial" to go To the dialing process.
13. After the connection is successful, the dial-up grid icon appears in the lower right corner of the computer.
14. After the dial-up is successful, you also need to set the IE browser to access the Internet normally. The specific steps are as follows,
Right-click Internet Explorer, select Properties, select the connection page, and set it:
(1) set the dial-up just created as the default, and select the "always dial default connection" option.
(2) Click "set" to set the proxy server, enter the address 10.0.0.172, and port 80.
(3) Click OK to save the settings and exit the settings page. Then, double-click Internet Explorer to enable the settings.
(4) If you use QQ or other online tools on your computer, you must set the proxy servers of these software in a similar way.
15. The above methods are charged by means of cmwap, which is suitable for cmwap subscription users.