Joint debugging file for proteus6.9 and later versions

1. Install keilc51 (U2 and U3) and proteus6 (94 and 95;
2. Download two software packages, one is proteu's vdmagdi.exe, and the other is the authorized prospice. dll.

3rd, first run vdmagdi.exe to install the Keil interface, and then overwrite prospice. dll in the bin of the Proteus installation folder, such as: D:/program files/labcenter electronics/Proteus 6 Professional/bin;
4. Open proteus and select user remote debug monitor from the debug drop-down menu (check before this option );
5. Open keilc51, click [menu] [project] [set options for the target 'xx'], and select [UseU] Select one option, and select the [Proteus VSM simulator] simulation device from the drop-down box;
6. Connect the hardware on the Proteus side, write the software on the Keil side, and click Keil [debug] [run]. You can enjoy the joint debugging.
1. Install keilc51 (U2 and U3) and proteus6 (94 and 95;
2. Download two software packages, one is proteu's vdmagdi.exe, and the other is the authorized prospice. dll (for the link addresses of the two files, see the following)
3rd, first run vdmagdi.exe to install the Keil interface, and then overwrite prospice. dll in the bin of the Proteus installation folder, such as: D:/program files/labcenter electronics/Proteus 6 Professional/bin;
4. Open proteus and select user remote debug monitor from the debug drop-down menu (check before this option );
5. Open keilc51, click [menu] [project] [set options for the target 'xx'], and select [UseU] Select one option, and select the [Proteus VSM simulator] simulation device from the drop-down box;
6. Connect the hardware on the Proteus side, write the software on the Keil side, and click Keil [debug] [run]. You can enjoy the joint debugging.