Steps:
1. Ensure that the physical connection is normal.
2. set up a small office LAN in a network neighbor. You need to select a shared file and printer. When set in pC1, select this machine to connect directly to the Internet. When set in PC2, select this machine to connect to the Internet through the gateway, press enter to restart the computer.
3. Set the local connection to share.
4. The small office LAN of the wireless network is also set up. Pay attention to the item set by the contestant (the first item is the connection method of the USB wireless network card), and press enter along the way.
5. Set the wireless network card. The IP addresses of pC1 and PC2 must be in the same network segment. For example, pC1 is 192.168.1.101 and PC2 is 192.168.1.103. The default mask is 255.255.255.0 and pC1. The default gateway and DNS do not need to be empty, set the default gateway and DNS of Pc2 to pC1. Set 192.168.1.101 here. OK.
6. in the second tab of the wireless network card properties, select the first dialog box, click "add" in "preferred network" below, and enter a network name that you remember in the SSID, select "open" and "Disable" for the following two items, and select "computer to computer only" for the "advanced" button below, other Default values (the same settings for pC1 and PC2 ).
7. In the third tab of the wireless network card properties, the "Network Connection Sharing" button is displayed, and the firewall can be turned on or off.
8. "Start" -- "run" -- the CMD command cannot be pinged for testing. It should be able to be passed here. If it doesn't work, shut down the firewall and try again.
9. At this time, pC1 and PC2 will find the wireless network. The name is the configured SSID. After the connection, you can access the Internet (PC2 )~~~
10. The settings are complete.
Note:
1. security considerations are not taken into account for this setting, and some of the possible settings are unnecessary. Please pay attention to them and give your best advice to make the settings flexible and secure and remove unnecessary settings :)
2. Check whether the Ping is successful after the configuration is complete. If there is a problem, locate the cause step by step.
3. I can enable or disable the firewall. If you cannot access the firewall, try again.
4. As long as you can connect to the Internet, you can share the internet, no matter What client :), especially for hotels, dormitories, homes ...... It seems like hub settings ~~
