Linux Software Installation using (5) cross-compilation environment __linux

<!--@page {margin:0.79in} P {margin-bottom:0.08in}--> cross-compile Environment Cd/opt/sudo Tar xvfj/home /qian/desktop/eabi-4.3.3_embedsky_20100610.tar.bz2-c/Gedit/etc/profile #if The Linux is not Ubuntu gedit/etc/ Environment #if The Linux is ubuntu/opt/embedsky/4.3.3/bin/106 sudo chmod a+w/etc/environment gedit/etc/environmen T 108 109 source/etc/environment #make the adaptation effect!

a@ubuntu:/opt/embedsky/linux-2.6.30.4$ sudo make zimage
MAKE:ARM-LINUX-GCC: Command not found
CHK Include/linux/version.h
MAKE[1]: "Include/asm-arm/mach-types.h" is up to date.
CHK include/linux/utsrelease.h
SYMLINK include/asm-> Include/asm-arm
CC KERNEL/BOUNDS.S
/bin/sh:arm-linux-gcc:not found
MAKE[1]: * * * [KERNEL/BOUNDS.S] Error 127
Make: * * * * [PREPARE0] Error 2
a@ubuntu:/opt/embedsky/linux-2.6.30.4$

There are still problems after building an integrated development environment

By using

SU switches to root #特权模式, normal use

If there is no root password

sudo passwd root

Your code.

Su

Then you can run it properly.