Network-based debian Installation

Debian-Linux Release Technology-Debian information is installed on the network. For details, refer to the following section. 1. Select http installation and write the Server ip address (192. 168. *. *) and file directory (/mirrors/debian)

2. Select a language in simplified Chinese. Region, China. Keyboard, American English. Host Name, Domain

3. Start disk partitioning. Separate/boot,/, and use the existing swap partition.

4. Start the installation and choose to write grub to mbr when the installation is completed.

5. After the restart, set the time zone (without GMT), set the user: stephen, password: (confidential ).

6. Add apt source to the company's internal source address.

7. Configure the exim client. If you do not want to use exim as the mail client, you can choose not to configure the exim program.

8. I did not select anything when I chose to install software, because I wanted a highly customized system.

9. After the base-config is completed, you can log on to the system. If you want to perform base-config in the console and use apt to install the software, no garbled characters will appear, you need to run zhcon to enter the Chinese Console environment to see the normal Chinese interface, unless you have set the console to not use the Chinese locale, or use the unicon patch kernel, install zhcon first. sudo apt-get install zhcon is simple, and then run zhcon to enter the Chinese Console environment.

10. If an adsl dial-up Internet user enters the Debian system, configure the dial-up program and run pppoeconfig for configuration. Enter your ADSL account and password as prompted. Note: Do not set the network card gateway; otherwise, the network card cannot be connected to the Internet. After successfully connecting to the Internet, select the source for further installation.